Phone: +86 21 62999507, 62999806

E-mail: info@eureka-machinery.com

China New Product Window Pasting Machine – STC-1080G Automatic High Speed Window Patching Machine – Eureka

Features:

Product Detail

Feedback (2)

Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for Classic Cut Cl310 , Stack S12 Paper Cutter , Photo Sheet Cutter , We welcome new and old shoppers to make contact with us by telephone or mail us inquiries by mail for foreseeable future company associations and attaining mutual achievements.

China New Product Window Pasting Machine – STC-1080G Automatic High Speed Window Patching Machine – Eureka Detail:

STC-1080G	Single Lane (Single Speed)	Single Lane (Double Speed)	Double Lanes (Single Speed)	Double Lanes (Double Speed)
Max paper size(mm)	1080×1100	1080×520	500×1100	500×520
Min paper size(mm)	100×100	100×100	100×100	100×100
Max window size(mm)	780×700	780×320	350×700	350×320
Min window size(mm)	40×40	40×40	40×40	40×40
Cardboard (g/㎡)	200-1000	200-1000	200-1000	200-1000
Corrugated paper(mm)	≤5.0	≤5.0	≤5.0	≤5.0
Film thickness	0.05-0.25mm	0.05-0.25mm	0.05-0.25mm	0.05-0.25mm
Max working speed(s/h)	10000	16000	16000	30000
Total power (kw)	10	10	10	10
Total weight (T)	3.5	3.5	3.5	3.5
Dimension(mm)	5800×1960×1600	5800×1960×1600	5800×1960×1600	5800×1960×1600

STC1
STC2

1. Feeder:

◆ The unique supporting plate and wheel feeding type replaces the servo intermittent feeding type.

◆ Ensure that the paper is smooth

◆ Deliver the paper with high speed, stable and reliable.

◆ Our company has won the national patent for this part.

STC3

2. Rotation rubber roller (can pull-out):

◆ Single rubber roller cooperate with baffle to gluing.

◆ Avoid the waste of glue, reduce the volatilization.

◆ When the machine stopped, the rubber roller can rotation driving by the motor. Avoid the glue solidify on the face of rubber roller.

◆ When cleaning the rubber roller, this part can pull-out entirely, reduce cleaning time.

STC4

3. Gluing:

◆ Use automatic gluing instead of hand movement.
◆ This part can adjust the glue roller right or left、up or down.
◆ When the photoelectric sensor reacted the paper. If there are papers pass, the machine will use the air cylinder to control platform to uplift.
◆ If there are no papers pass, the platform will decline.
◆ Avoid the glue smear on the belt.

STC5

4. Suction belt:

◆ The two suction belts are wide and thick,increase service life.

◆ With the device of adjust the wind power.

◆ Can adjust wind power according to the sizes of papers.

◆ Ensure that no position offset.

STC6

5. Film transport:

◆ Film Transport is controlled by the servo motor.

◆ With high precision,make the error of cutting the film is less than 0.5mm.

◆ Adopt the touch screen to adjust the length of the film.

◆ Make the adjustment more convenient and efficient.

STC7

6. Roller knife:

◆ Quality alloy steel was adopted special heat treatment process to ensure long working hours.

◆ Use the touch screen to set the film length so that the machine can runs more accurate, stable and reliable.

STC8

7. Jog film cutting (Special for tissue boxes):

◆ Special design for the middle cutting of the film, such as tissue boxes point cut or long cut.

◆ Incision length is adjustable, ensure accurate and never shifting.

STC9

Operating Conditions:

◆ Working temperature is 5ºC to 40ºC.

◆ Transportation and storage temperature is-25ºC to 55ºC.

◆ The relative temperature is not greater than 60% (20%c), and the altitude is not more than 1000 m.

Power supply specification:

◆ Total power: 3 phase 4 wire,380V 50HZ

◆ Control power: single phase,220V AC 24V DC

◆ Deviation: ±10%V ±1HZ

◆ Total power:10KW

Note：Due to the diversity of products, the applicability of the machine will be affected. So the above data is not applicable to every product.

1. Low voltage apparatus:

NO.	NAME	MODEL	QTY	NOTE
1	Breaker	DZ108-20 0.6-1A	1	TANGANT
2	Breaker	DZ108-20 4-6.3A	1	TANGANT
3	Breaker	DZ108-20 5-8A	3	TANGANT
4	Breaker	DZ47-63-1PD 6A	2	TANGANT
5	AC Contactor	LC1-D901	4	SCHNEIDER
6	Button	ZB2BA2+ZB101C	14	SCHNEIDER
7	Emergency Stop Switch	ZB2BS54+BZ102C	2	SCHNEIDER
8	Switching Power	ABL2REM24045H	1	SCHNEIDER
9	Cooling fan	TA12025SL-2 AC220	2
10	Buzzer	TBNAC220V-240VJBK5-400VA PUT IN	1	TEND
11	Speed Control Knob	4.7KΩ	1
12	Change-over Switch	GLD11-63/04	1	TEND
13	Photoelectric Switch	E3ZD61	2	OMRON
14	Encoder	MT3806-2000B2-24T	1	MT

2.Frequency converter, PLC, Servo control:

NO.	NAME	MODEL	QTY	NOTE
1	Frequency Converter	VFDO 3.7EL43A	1	DELTA
2	Programmable Controller	VS1-32MT	1	VIGOR
3	Servo Motor	0.75KW	1	WEIKEDA
4	Servo Driver	VEC-VC-R75H23B-M-C	1	WEIKEDA
5	Human Machine Interface	MT4434T	1	KINCO

3.Motor configuration:

NO.	NAME	MODEL	QTY	NOTE
1	Main motor	VABPI00L-4 3.0KW	1	DEDONG
2	Vortex pump	2LG5107AH362LG4107AH36	1	MEILAILE
3	Pump	ZFB80A	1	TONGNENG
4	Rubber roller motor	90YS90GY38X 100GF6H	1	JINGYAN

4.Pneumatic component:

NO.	NAME	MODEL	QTY	NOTE
1	Cylinder For Support Paper	CQ2A32-10DM	1	SMC
2	Cylinder For Suction Plate.	SDA25*10	2	SNS
3	Rubber Roller Cylinder	SDAJ25*15-15-B	2	SNS
4	Vibrating Motor	GT-08	1	SNS
5	Five-way Valve	SY7120-5GD-02	1	SMC