MAKIINADDA DAABACAADDA FLEXO EE SUMMADADA ZJR-450G
ASTAYN
1. Mashiinka oo dhan wuxuu qaataa nidaamka xakamaynta servo ee ugu dambeeyaySiemenslaga bilaabo Jarmalka iyo daabacaad kasta
Cutubka waxaa wada matoor servo oo madax-bannaan.17adeegmatoorada guud ahaan7midabsmashiin hubinaya diiwaangelinta saxda ah oo ku socota xawaare sare.
2. Rullaluistemka daabacaaddu wuxuu qaataa nidaam gacmo-gashi oo fudud, fudud, ku habboon oo dhaqso badan in la beddelo. Naqshaddani waxay si weyn u wanaajisaa tayada daabacaadda waxayna yareysaa dayactirka.
3. Hagaajinta cadaadiska degdega ah iyo fudud ee wareejinta daabacaadda ama khad: duubista daabacaadda waxaa maamula side. Ma aha
lagama maarmaan u ah hagaajinta cadaadiska marka la beddelayo duubka, ama ugu badnaan si fiican u hagaaji shaqo gaar ah.
4. Roogga Anvil wuxuu ku qalabaysan yahay qaboojiyaha biyaha, sidoo kale waa u fiican yahay walxaha filimka.
DUSHA MAADADA
Warqad iyo warqad dhejis ah: 20 ilaa 500 garaam
Bopp, Opp, PET,PP, Shink Sleeve, IML, IWM, Filimka ugu balaastikada badan. (12 micron -500 micron)
Qeexitaanka Farsamo ee ugu Muhiimsan
| Moodel | Qaabka ZJR-450G |
| Xawaaraha Daabacaadda ugu Badan | 180m/daqiiqo |
| Midabka Daabacaadda | 7midabyo |
| Ballaca ugu badanoWarqad | 470mm |
| Ballaca Daabacaadda ugu Badan | 450mm |
| Ballaca ugu badan ee Furitaanka | 900mm |
| Ballaca ugu badan ee dib u soo celinta | 900mm |
| Dhererka Daabacaadda | Z76-Z192 (241.3mm-609.6mm) |
| Cabbirrada (8)Colors+3Dtusaale ahaan jarista) | 10.83mx 1.68mx 1.52m ( L x W x H ) |
SAWIRADA MASHIINKA:
1) Rullaluistemka daabacan wuxuu qaataa nidaamka gacmo-gashiga kaas oo si fudud oo ku habboon in la beddelo.
2) Roolaha Anvil wuxuu ku qalabaysan yahay qaboojiyaha biyaha weyn, wuxuu u fiican yahay walxaha filimka
3) Barka Wareegga La Dhaqaaqayo
4) Shaashad Taabasho oo Dhaqaaq ah
5) Cutubka Matrix (oo leh cutubka jarista dhimaha) + Qaadaha Birlabta ah
Qaabeynta Mashiinka:
Nidaamka Xakamaynta Otomaatiga ah
- Kii ugu dambeeyaySiemensnidaamka xakamaynta
- Hawlgalka labada Ingiriis iyo Shiine
- Senor-ka Diiwaangelinta (P+F)
- Nidaamka ogaanshaha cilladaha otomaatiga ah iyo digniinta
-Nidaamka kormeerka fiidiyowga BST (nooca 4000)
- Korontada: 380V-400V, 3P, 50HZ-60HZ
Nidaamka Quudinta Waxyaabaha
- Dib u fur adigoo isticmaalaya kor u qaadis neef-mareen ah (dhexroorka ugu badan: 900mm)
- Usha hawada (3 inji)
- Si otomaatig ah u nadiifi oo u nadiifi
- Kala-goysyada wareegaya ee pneumatic
-Bareega budada birlabta ah
- Xakamaynta xiisadda otomaatiga ah
- Nidaamka joojinta otomaatiga ah ee la'aanta agabka
Nidaamka hagitaanka shabakadda -RE
- Waxaa ku quudiya matoorka servo (Siemensmatoorka servo)
Nidaamka Daabacaadda
-Qalab daabacan oo aad u dabacsan
-Dalbaalka daabacaadda waxaa maamula matoor toos ah oo madax-bannaan (si looga fogaado calaamadaynta gear-ka)
- Daabacaadda dhululubo leh gacmo-gashi, waa mid fudud oo si fudud loo beddeli karo.
- Saxanka daabacaadda: saxanno lagu dhejiyay gacanta
-Rooler aragti bilaash ah iyo roog biyo qaboojiye ah.
- Roolaha qaboojiyaha biyaha oo ay wadaan matoorka servo ee madaxa-bannaan waxayna si fiican u daabici karaan filimka balaastikada ah.
-Nidaamka wareegga dhiigga ee qaboojinta otomaatiga ah
-Qalabka rinjiyeynta iyo qaboojiyaha biyaha ee bilaashka ah waxaa loogu talagalay in lagu sameeyo midab kala duwan, xitaa khad ku shaqeeya oo ku jira duubista muuqaalka, way fududahay in la nadiifiyo sababtoo ah iyada oo aan lahayn daawayn UV ah.
- Daabacaad kastacutubku wuxuu leeyahaymatoor laba servo ahxakamaynta.
Servo 1 wuxuu xakameeyaa gacanta daabacaadda, Servo 2-na wuxuu xakameeyaa duubista durbaanka qaboojiyaha weyn.
-Isdiiwaangelin horewaxaa xakameeya matoorka servo, matoorkuna si toos ah ayuu u xisaabin doonaa marka aad geliso dhererka daabacaadda shaashadda taabashada ugu weyn. Gacanta daabacadu waxay aadi doontaa saldhigga booska u dhigma ee barta eber ee gacanta.
- Diiwaangelin fiicanwaa in lagu hagaajiyaa shaashadda taabashada
Markaad sameyso diiwaanka midabka saxda ah, ka dibna fur dareemaha diiwaanka si aad u akhrido calaamadda daabacaadda, mashiinku wuxuu sameyn karaa diiwaangelin otomaatig ah had iyo jeer.
- Guddi hawlgal oo loogu talagalay hagaajinta wanaagsan oo leh shaqo is-xirid ah
- Hagaajinta cadaadiska fiican ee qofka sita
- Cadaadiska ka dhexeeya duubka anilox, saxanka daabacaadda iyo walxaha waxaa si fiican u hagaajin doona orso taas oo
Waxaa xakameeya matoor yar. si fudud ayaa loogu shaqayn karaa furaha ku lifaaqan.
- Gudubka Labaad ee dareemaha diiwaangelinta (P+F)
- Si fudud looga saaro anilox roller
- Saxan khad ah oo fudud oo la qaadi karo, kor/hoos u qaad otomaatig ah
- Shaashad taabasho oo la dhaqaajin karo (hawlgal fudud)
-Xariiqda ilaalada ee mashiinka oo dhan (Schenider-France)
Qalajiyaha UV (Qalabka qaboojiyaha marawaxadaha 9KW halkii cutub)
-UV Ray oo laga keenay Talyaaniga, Stepless electronic UV
-Xakamaynta korontada ee madax-bannaan ee qalajiyaha UV kasta
- Isbeddelka otomaatiga ah iyadoo loo eegayo xawaaraha daabacaadda
- Xakameyn otomaatig ah oo leh qiiqa UV
- Guddi xakameyn UV oo madax-bannaan
Nidaamka Dib-u-soo-celinta
- Waxaa kaxeeya matoorka servo ee madaxa-bannaan (usha hawada ee 3 inji ah)
- Dib-u-hagaajin laba-laab ah oo ikhtiyaari ah
- Si otomaatig ah u nadiifi oo u nadiifi
-SMC Pneumatic swivel
Nidaamka xakamaynta xiisadda otomaatiga ah -RE
- Dib-u-hagaajin leh kor u qaadis neef-mareen ah (dhexroorka ugu badan: 900mm)
Qaabeynta ugu Weyn
| ● NIDAAMKA XAKAMEYNTA | |||
| Sharaxaad | Fiiro gaar ah | Tirada | Magaca Summada |
| Nidaamka Xakamaynta Kumbuyuutarka | Nidaamka Xakamaynta Dhinacyada Badan | 1 | Siemens(Jarmalka) |
| PLC | 1 | Siemens(Jarmalka) | |
| Module-ka Kordhinta PLC | 1 | Siemens(Jarmalka) | |
| Module Analog ah | 1 | Siemens(Jarmalka) | |
| Shaashadda Taabashada ee Mashiinka Weyn | Midabka Dhabta ah | 1 | Siemens(Jarmalka) |
| Module-ka IO-ga fog | 1 | Phoenix (Jarmalka) | |
| Beddelka Hawada | 1 | Schneider (Faransiiska) | |
| Beddel/ Badhan | 8 | Schneider (Faransiiska) | |
| Xiriiriyaha | 5 | Schneider (Faransiiska) | |
| Beddelidda Korontada | 1 | Meanwell (Taiwan) | |
| Fiilada Duulimaadka&Baloogga Terminalka | 6 | SIBAS | |
| ● QAYB KASTA OO DAABACAAD AH | |||
| Sharaxaad | Fiiro gaar ah | Tirada | Magaca Summada |
| Matoorka Servo-ga ee Biyaha Qaboojiyaha | 1 | Siemens(Jarmalka) | |
| Matoorka Servo-ga ee Biyaha Qaboojiyaha | 1 | Siemens(Jarmalka) | |
| Matoorka Servo ee Foomka Daabacaadda | 1 | Siemens(Jarmalka) | |
| Foomka Daabacaadda ee Servo Driver | 1 | Siemens(Jarmalka) | |
| Yareeyaha Gaarka ah | 1 | SH1MPO-ABLE (Jabaan) | |
| Beddelka Xadka | 8 | Schneider (Faransiiska) | |
| Jidka Toosan ee Hagaya | 4 | PMI (Taiwan) | |
| Silsilad | 14 | SMC (Japan) | |
| href="#/javascript:;" SolenoidWadnaha | 10 | SMC (Japan) | |
| ● NIDAAMKA WEBSAYDKA | |||
| Sharaxaad | Fiiro gaar ah | Tirada | Magaca Summada |
| Matoorka Adeegga | 3KW | 2 | Siemens(Jarmalka) |
| Darawalka Servo Motor | 2 | Siemens(Jarmalka) | |
| Hoos u dhige gaar ah | 2 | SH1MPO-ABLE (Jabaan) | |
| Sawirka loo yaqaan 'Photocell' ee loogu talagalay duubka dhammaadka | 1 | Schneider (Faransiiska) | |
| ● NIDAAMKA DIB U EEGIDDA | |||
| Sharaxaad | Fiiro gaar ah | Tirada | Magaca Summada |
| Matoorka Adeegga | 1 | Siemens(Jarmalka) | |
| Dareemaha | 1 | RE – Talyaaniga | |
| Beddel | Dhowr | Schneider (Faransiiska) | |
| ● NIDAAMKA JABAN | |||
| Sharaxaad | Fiiro gaar ah | Tirada | Magaca Summada |
| Hagaha shabakadda Ultrasonic-ka | 1 | RE – Talyaaniga | |
| Aaladda budada birlabta ah | 1 | RE – Talyaaniga | |
| Dareemaha | 1 | RE – Talyaaniga | |
| Beddel | Dhowr | Schneider (Faransiiska) | |
| ● NIDAAMKA KALE | |||
| Sharaxaad | Fiiro gaar ah | Tirada | Magaca Summada |
| Nidaamka Qalajiyaha UV |
| 1SET | UV Ray-Talyaaniga |
| Nidaamka Fiidiyowga |
| 1SET | BST (Jarmalka) |
Mashiinka aqoon-is-weydaarsigayaga:
AQOON-SOO-SAARIDEENA CNC
Qaar ka mid ah Muunadaha Daabacaadda:
