Na'urar Buga Lakabi ta ZJR-450G
HALAYYA
1. Duk injin ɗin yana amfani da sabon tsarin sarrafa servoSiemensdaga Jamus da kowace bugu
Injin servo mai zaman kansa ne ke tuƙa na'urar. Akwai17servojimillar motoci don7launisna'ura wadda ke tabbatar da ingantaccen rajista yana gudana a babban gudu.
2. Na'urar buga takardu ta yi amfani da tsarin hannun riga wanda yake da sauƙi, mai sauƙi, mai sauƙin canzawa kuma mai sauri. Wannan ƙirar ta fi inganta ingancin bugawa kuma tana rage kulawa.
3. Saurin da sauƙin daidaita matsi na bugawa ko canja wurin tawada: abin naɗin bugawa wanda mai ɗaukar kaya ke gudanarwa. Ba haka ba ne
Dole ne a daidaita matsin lamba lokacin canza abin nadi, ko kuma a mafi kyawun daidaitawa don aiki na musamman.
4. Anvil roll yana da na'urar sanyaya ruwa, yana da kyau ga kayan fim ɗin.
ABUBUWAN DA KE CIKIN GIDAN
Takarda da takarda mai mannewa: Gram 20 zuwa 500
Bopp, Opp, PET,PP, Hannun Riga, IML, da sauransu, Mafi yawan fim ɗin filastik. (12 micron -500 micron)
BABBAN BAYANIN FASAHA
| Samfuri | Samfurin ZJR-450G |
| Mafi girman Saurin Bugawa | 180m/min |
| Launin Bugawa | 7launuka |
| Matsakaicin Faɗiof Takarda | 470mm |
| Matsakaicin Faɗin Bugawa | 450mm |
| Matsakaicin Diamita na Buɗewa | 900mm |
| Matsakaicin Diamita Mai Juyawa | 900mm |
| Tsawon Bugawa | Z76-Z192(241.3mm-609.6mm) |
| Girma (8)Colors+3Dwatau Yankewa) | 10.83mx 1.68mx 1.52m (L x W x H) |
HOTUNA NA'URAR:
1) Buga na'urar busarwa ta rungumi tsarin hannun riga wanda yake da sauƙi kuma mai sauƙin canzawa.
2) Anvil nadi yana sanye da babban injin sanyaya ruwa, yana da kyau ga kayan fim
3) Sanda Mai Juyawa Mai Motsi
4) Allon Taɓawa Mai Motsi
5) Matrix Unit (tare da na'urar yanke mutu) + Magnetic Roller Lifter
Tsarin Inji:
Tsarin Sarrafa Mota
-SabuwarSiemenstsarin sarrafawa
- Aiki cikin Ingilishi da Sinanci
-Sanata mai rijista (P+F)
- Gano kurakurai ta atomatik da tsarin ƙararrawa
-BST tsarin duba bidiyo (nau'in 4000)
- Wutar Lantarki: 380V-400V,3P, 50HZ-60HZ
Tsarin Ciyar da Kayan Abinci
-Saukewa tare da ɗagawa ta iska (matsakaicin diamita: 900mm)
- Shaft ɗin iska (inci 3)
- An kunna kuma an kashe ta atomatik
- Haɗin gwiwa mai juyawa na huhu
-Bireki mai amfani da foda mai maganadisu
-Sarrafa tashin hankali ta atomatik
- Tsarin tsayawa ta atomatik don rashin kayan aiki
Tsarin jagorar yanar gizo -RE
- Injin servo (Siemensinjin servo)
Tsarin Bugawa
- Na'urar buga bugu ta super flexo
- Silinda na bugawa ana sarrafa shi ta hanyar injin kai tsaye mai zaman kansa (don guje wa alamar gear)
- Silinda mai bugawa da hannun riga, mai sauƙi ne kuma mai sauƙin canzawa.
-Fararen bugawa: faranti da aka ɗora a kan hannun riga
-Na'urar naɗawa mai ban sha'awa da kuma na'urar sanyaya ruwa kyauta.
- Injin servo mai zaman kansa yana tuƙa na'urar sanyaya ruwa kuma tana iya buga fim ɗin filastik da kyau.
- Tsarin sanyaya wurare dabam dabam ta atomatik
- An tsara na'urar jujjuyawar ra'ayi kyauta da kuma na'urar sanyaya ruwa a cikin rabe-rabe, har ma da tawada a cikin abin naɗin ra'ayi, yana iya zama mai sauƙin tsaftacewa saboda ba tare da maganin UV ba.
- Kowane bugunaúrar tana dainjin servo guda biyuiko.
Servo 1 yana sarrafa hannun bugawa, kuma Servo 2 yana sarrafa babban abin naɗa ganga mai sanyi.
-Yi rijista kafin lokaciAna sarrafa shi ta hanyar injin servo, kuma injin zai ƙididdige shi ta atomatik lokacin da ka shigar da tsawon bugawa a babban allon taɓawa. Hannun bugu zai tafi zuwa ga matsayin da ya dace akan sifili a kan hannun riga.
- Rijista mai kyauya kamata a daidaita shi akan allon taɓawa
Idan ka yi rajistar launi daidai, to ka buɗe firikwensin rajista don karanta alamar bugawa kuma injin ɗin zai iya yin rajista ta atomatik koyaushe.
- Panel ɗin aiki don daidaitawa mai kyau tare da aikin kulle kai
- Daidaita matsin lamba mai kyau ga mai ɗaukar kaya
- Za a daidaita matsin lamba tsakanin abin nadi na anilox, farantin bugawa da kayan da ya dace da beyar wanda
Ƙaramin injin yana sarrafa shi. Ana iya sarrafa shi cikin sauƙi ta hanyar maɓalli da aka haɗa.
- Na biyu wucewa ta firikwensin rajista (P+F)
- Sauƙin cire anilox roller
- Tiren tawada mai sauƙi, sama/ƙasa ta atomatik
- Allon taɓawa mai motsi (mai sauƙin aiki)
- Layin tsaro na injin gaba ɗaya (Schenider-Faransa)
Na'urar busar da iska ta UV (Mai sanyaya fanka 9KW a kowace na'ura)
- Alamar UV Ray daga Italiya, Stepless lantarki UV
- Ikon sarrafawa mai zaman kansa ga kowane na'urar busar da UV
- Canza wutar lantarki ta atomatik dangane da saurin bugawa
- Sarrafa atomatik tare da sharar UV
- Kwamitin kula da UV mai zaman kansa
Tsarin Juyawa
- Injin servo mai zaman kansa (shaft na iska mai inci 3) ne ke tuƙa shi
- Sake juyawa sau biyu don zaɓi
- An kunna kuma an kashe ta atomatik
-SMC Pneumatic swivel
-Re tsarin sarrafa tashin hankali ta atomatik
- Mai sake juyawa tare da ɗaga iska (mafi girman diamita: 900mm)
Babban Saita
| ● Tsarin Kulawa | |||
| Bayani | Bayani | Adadi | Sunan Alamar |
| Tsarin Kula da Kwamfuta | Tsarin Kula da Axis Mai Yawa | 1 | Siemens(Jamus) |
| Kamfanin PLC | 1 | Siemens(Jamus) | |
| Tsarin Fadada PLC | 1 | Siemens(Jamus) | |
| Na'urar Analog | 1 | Siemens(Jamus) | |
| Allon taɓawa don Babban Injin | Launi na Gaskiya | 1 | Siemens(Jamus) |
| Module na IO mai nisa | 1 | Phoenix (Jamus) | |
| Makullin Iska | 1 | Schneider (Faransa) | |
| Canja/ Maɓalli | 8 | Schneider (Faransa) | |
| Mai hulɗa | 5 | Schneider (Faransa) | |
| Sauya Wutar Lantarki | 1 | Meanwell (Taiwan) | |
| Filogin Jirgin Sama&Toshe na Tashar | 6 | SIBAS | |
| ● KOWANNE RUKUNIN BUGA | |||
| Bayani | Bayani | Adadi | Sunan Alamar |
| Injin Na'urar ... | 1 | Siemens(Jamus) | |
| Injin Na'urar ... | 1 | Siemens(Jamus) | |
| Motar Na'urar Naɗa Mota ta Bugawa | 1 | Siemens(Jamus) | |
| Buga Fom ɗin Na'urar Naɗa Servo Driver | 1 | Siemens(Jamus) | |
| Na'urar rage na'ura ta musamman | 1 | SH1MPO-ABLE (Japan) | |
| Canjin Iyaka | 8 | Schneider (Faransa) | |
| Hanyar Jagora Madaidaiciya | 4 | PMI (Taiwan) | |
| Silinda | 14 | Kamfanin SMC (Japan) | |
| href="#/javascript:;" SolenoidBawul | 10 | Kamfanin SMC (Japan) | |
| ● Tsarin Wucewa ta Yanar Gizo | |||
| Bayani | Bayani | Adadi | Sunan Alamar |
| Motar Servo | 3KW | 2 | Siemens(Jamus) |
| Direban Motar Servo | 2 | Siemens(Jamus) | |
| Na'urar rage gudu ta musamman | 2 | SH1MPO-ABLE (Japan) | |
| Photocell don ƙarshen birgima | 1 | Schneider (Faransa) | |
| ● Tsarin Gyara | |||
| Bayani | Bayani | Adadi | Sunan Alamar |
| Motar Servo | 1 | Siemens(Jamus) | |
| Firikwensin | 1 | RE – Italiya | |
| Canjawa | Da yawa | Schneider (Faransa) | |
| ● Tsarin Ɗaukar Nauyi | |||
| Bayani | Bayani | Adadi | Sunan Alamar |
| Jagorar yanar gizo ta Ultrasonic | 1 | RE – Italiya | |
| Na'urar foda mai maganadisu | 1 | RE – Italiya | |
| Firikwensin | 1 | RE – Italiya | |
| Canjawa | Da yawa | Schneider (Faransa) | |
| ● SAURAN TSARI | |||
| Bayani | Bayani | Adadi | Sunan Alamar |
| Tsarin Busar da UV |
| SET 1 | Hasken UV-Italiya |
| Tsarin Bidiyo |
| SET 1 | BST (Jamus) |
Inji a cikin bitarmu:
BITAR BITAR CNC ɗinmu
Wasu Samfurin Bugawa:
