ifowuni Ifowuni: +86 21 62999507, 62999806
ico E-mail: info@eureka-machinery.com
English
Ukufunxwa kwe-SAIOB-Vacuum Flexo Ukuprinta kunye nokuSlotting kunye nokusika i-Die kunye neGlue kuMgca Umfanekiso oPhambili
  • Ukufunxa i-SAIOB-Vacuum Flexo Printing & Slotting & Die cutting kunye neGlue in Line

Ukufunxa i-SAIOB-Vacuum Flexo Printing & Slotting & Die cutting kunye neGlue in Line

Iimbonakalo:

Isantya esiphezulu yi-280sheets/min.Ubungakanani bokutya obuphezulu (mm) 2500 x 1170.

Ubukhulu bephepha: 2-10mm

Isikrini sokuchukumisa kunyei-servoukusebenza kolawulo lwenkqubo. Inxalenye nganye ilawulwa yi-PLC kwaye ilungiswa yi-servo motor. Indawo enesitshixo esinye, ukuseta kwakhona ngokuzenzekelayo, ukuseta kwakhona imemori kunye neminye imisebenzi.

Izinto ezikhaphukhaphu ze-alloy zeerola zitshizwa ngeeseramikhi ezingagugiyo, kwaye iirola ezihlukeneyo zisetyenziselwa ukufunxa kunye nokuhambisa nge-vacuum.

Uyakwazi ukuphumeza ulondolozo olukude kwaye uqhagamshele kuyo yonke inkqubo yolawulo lwezityalo.


Iinkcukacha zeMveliso

Ividiyo

Ukufunxa iVacuum Printing & Slotting & Die cutting kunye neGlue kumgca we-SAIOB-2500*1200-4 imibala (Iprinta ephezulu)

Igama

Isixa
Iyunithi yokondla (i-Lead Edge feeder)

1
Iyunithi yeprinta (i-Ceramic anilox roller + iBlade)

4
Iyunithi yokubeka (i-shaft yeslot ephindwe kabini)

1
Iyunithi yokusika iidayi

1
Iyunithi yokuncamathelisa ngokuzenzekelayo

1

UKULUNGISWA KOOMATSHINI

I-SAIOB-Vacuum suction Flexo Printing & Slotting & die cutting kunye negluer emgceni

(Uqwalaselo olusebenzayo kunye neeparameter zobugcisa)

Iyunithi yokusebenza elawulwa yikhompyutha

1. Umatshini usebenzisa ulawulo lwekhompyutha, kunye nomqhubi we-servo waseJapan.

2. Iyunithi nganye ixhotyiswe ngesikrini sokuchukumisa se-HMI esisebenza ngokulula, ukulungiswa ngokuchanekileyo kunye ne-auto zero.

3. Umsebenzi wememori: xa idatha echanekileyo ifakwa, igcinwa ngokuzenzekelayo ukuze isetyenziswe kwakhona. Umsebenzi wememori we-9999.

4. Idatha ingalungiswa nganye nganye, ngaphandle kokusebenzisa umsebenzi we-odolo. Umsebenzisi angasebenzisa ngokuzenzekelayo idatha yokufaka ezimeleyo esebenzisa inkqubo yokuseta ibhokisi enye. Ubude, ububanzi kunye nokuphakama kwebhokisi kunokungeniswa kwaye iyunithi yeslothi iya kuseta ngokuzenzekelayo.

5. Umatshini ungalungiswa ngokwawo kwaye idatha entsha ihlaziywe xa iboniswa ivumela umqhubi ukuba abone ukuba impazamo kumatshini iyasebenza.

6. Inkqubo yogcino xa kukho inkumbulo elahlekileyo. Idatha inokubuyiselwa ngokulula.

7. Ukuba umatshini ufuna ukuvulwa ngexesha lokusebenza, xa uvala umatshini uya kubuyela ngokuzenzekelayo kwindawo yawo yokuqala.

8. Ukuphakamisa i-anilox ngokuzenzekelayo ukuze kongiwe ukuhlamba okungeyomfuneko.

9. Isikrini esikhulu semoto sibonisa isantya, ukutya, ukubaleka

10. Isikrini esiphambili sibonisa iseti yolandelelwano, kwaye xa inani lokwenyani liveliswa, i-feed iyayeka ngokuzenzekelayo kwaye i-anilox iphakama ngokuzenzekelayo kwipleyiti.

11. Iintlobo zeekhathoni ezicwangcisiweyo ziyafumaneka.

12. Zonke iisayizi ziboniswa ngokucacileyo.

13. Uhlaziyo lwesoftware yasimahla lweminyaka emithathu.

Iyunithi Yokondla

 u-asdad (7)

Iyunithi yokutya isebenzisa ubuchwepheshe be-JC lead edge feeder, efanelekileyo kuzo zonke iintlobo ze-corrugated.

Irola yokuphakelwa eqhutywa ziimoto zeservo ezi-4, ngaphandle kwempazamo yokudluliselwa koomatshini.

Uxinzelelo lomoya olusebenzisa i-vacuum cleaner lunokulungiswa ngokobungakanani bephepha.

Irola yokuphakelwa kwerabha ephindwe kabini enobubanzi obuyi-147.6mm

Irola eqinileyo yentsimbi engaphantsi kabini enobubanzi obuyi-157.45mm

Uhlengahlengiso lwenjini olunesikrini sedijithali (0-12mm)

Inkqubo yokufunxa

Ixhotyiswe ngenkunkuma yokufunxa kunye nokususa uthuli. Oku kususa uninzi lothuli kumphezulu wokuprinta, ngaloo ndlela kuphucula umgangatho wokuprinta.

Ngale nkqubo yokufunxa, umonakalo kwishidi elibolileyo uyancitshiswa kwaye nangona utshintsho oluncinci kubukhulu bebhodi, umgangatho wokuprinta awuchaphazeleki.

Iyunithi yokutya iyakwazi ukulungelelaniswa ngokupheleleyo ngesandla, ngokusebenzisa i-motorization kunye nolawulo lwekhompyutha ye-CNC.

I-Auto Zero ivumela umatshini ukuba uvuleke, kwenziwe uhlengahlengiso, uvalwe kwaye ubuyiselwe kwindawo engu-zero, ngaloo ndlela konga ixesha lomqhubi.

Iyunithi yokuPrinta

u-asdad (8) 

Zonke iiyunithi zokuprinta ziqhutywa ziigiya ezineegiya ezijonge macala onke ukuze zisebenze kakuhle kwaye zithule

Ukudluliselwa kwe-vacuum ukuqinisekisa ukuchaneka kokuprinta ukuya kuthi ga kwi-+-0.5mm.

Isilinda sePrinta

 

Ububanzi obungaphandle buyi-393.97 (equlethe ububanzi bepleyiti yokuprinta yi-408.37mm)

Ukulungiswa kwebhalansi engaguqukiyo neguquguqukayo, ukusebenza kakuhle.

Umphezulu womhlaba onesigqubuthelo esiqinileyo se-chrome.

Uncamathiselo lwestereo ngenkqubo yeratchet yokutshixa ngokukhawuleza.

Isilinda sestereo sinokuqhutywa ngepedali yonyawo lomqhubi ukuze sisetwe.

Isilinda soxinzelelo lokuprinta

1. Ububanzi bangaphandle yi-172.2mm

2. Ukugaya umphezulu wentsimbi, i-chrome plating eqinileyo.

3. Ukulungiswa kwebhalansi kunye nokusebenza kakuhle.

4. Uhlengahlengiso lwe-printing nip lusetwe ngekhompyutha kunye nolawulo lwedijithali lwe-elektroniki.

I-Ceramic Anilox Roller

1. Ububanzi bangaphandle yi-236.18mm.

2. Isiseko sentsimbi esine-ceramic coating.

3. I-laser iqoshwe ngokweemfuno zomthengi.

4. Uyilo lotshintsho olukhawulezileyo lolondolozo olulula

Irola yerabha

1. Ububanzi bangaphandle yi-211mm

2.Intsimbi egqunywe ngerabha enganyangekiyo ngumhlwa

3. Gcwalisa ngesithsaba

I-Chamber Blade (ukhetho)

5. Igumbi elitywiniweyo elenziwe ngokukodwa le-aluminium, elinokonga ukuya kuthi ga kwi-20% yenkcitho ye-inki.

6. Ifakwe umaleko oluhlaza we-PTFE, okulula ukuwucoca kwaye unganamatheli.

7. Ukusetyenziswa kwendlela yokutshintsha ngokukhawuleza i-anilox kuyafumaneka njengokhetho.

Umhlawuleli

1. Izixhobo zeplanethi ezinokulungiswa kwe-360 degrees

2. Indawo esecaleni ihlengahlengiswa ngombane ngolawulo lwesikrini sokuchukumisa se-PLC, ukuya kumgama we-20mm, kunye nohlengahlengiso oluncinci oluya kuthi ga kwi-0.10mm.

3. Uhlengahlengiso olujikelezayo luqhutywa yisikrini sokuchukumisa se-PLC esinentshukumo engama-360

4. Ukulungiswa okuncinci nge-inverter ukuze kulungiswe kakuhle ukuya kuthi ga kwi-0.10mm

Ukujikeleza kwe-Ink

 

1. Impompo ye-diaphragm ye-pneumatic inika uzinzo lwe-inki, ukusebenza okulula kunye nokugcinwa kwayo.

2. Isilumkiso se-inki ephantsi.

3. Isihluzi seinki ukususa ukungcola.

Iyunithi yeSlotter (I-Option Twin Slot)

u-asdad (1)

Umngxuma oqhekekayo

1. Ububanzi be-shaft yi-154mm, i-chrome eqinileyo igqunywe ngentsimbi.

2. Uxinzelelo lulungiswa ngombane ukusuka kwi-0-12mm kwaye luboniswa ngesikrini sedijithali.

I-Slotting Shaft

1. Ububanzi be-shaft obuyi-174mm chrome eqinileyo bubekwe eplatini.

2. Ububanzi bemela eneembobo yi-7mm.

3. Iimela ziyintsimbi eqinileyo, zigalelwe umngxuma kwaye zirhabaxa.

4. Imela yokunqumla eneziqwenga ezibini echanekileyo kakhulu.

5. Isitishi seslot sisetwe ngesikrini sokuchukumisa se-PLC esinememori ye-odolo ezili-1000.

Umhlawuleli

Umhlawuleli

1. Isihlanganisi segiya yeplanethi, uhlengahlengiso lokuguqula umva lwe-360 degrees.

2. Isigaba sokutsala, ukusebenzisa imela phambili nangasemva i-PLC, ulawulo lwesikrini sokuchukumisa kunye nokulungiswa kwedijithali ye-360 yombane.

Ukhetho lokusebenzisa izixhobo zomngxuma wesandla

1. Ngee-boss ze-aluminium kunye neeseti ezimbini zezixhobo ezisikiweyo (ububanzi obuyi-110).

Icandelo lomomisi we-infrared (ukhetho)

1. Iyunithi yokomisa encedisayo yokucoca umoya; i-servo drive ezimeleyo.

2. Uthumelo oluncedisayo lwe-vacuum olupheleleyo.

3. Ubushushu obuhlengahlengiswayo ngokobungakanani bephepha.

4. Itafile yokudlulisa ekwaziyo ukuphakamisa.

Iyunithi Yokusika Idayi (iseti enye)

u-asdad (2)

Isilinda se-die kunye ne-anvil gap zihlengahlengiswa ngombane ngesikrini sedijithali.

Imisebenzi Yokusebenza

1. Isilinda sedayi kunye ne-anvil, xa zingasebenzi, zivulwa ngokuzenzekelayo ukuze kuncitshiswe impembelelo kumatshini kwaye kwandiswe ubomi be-urethane.

2. Isilinda sedayi sinohlengahlengiso oluthe tye lwe-10mm.

3. Isilinda se-Anvil sifakwe isenzo sokuzingela esizenzekelayo ukuya kuthi ga kwi-30mm, esisasaza ngokulinganayo apho kwaye sandise ubomi.

4. Lo matshini uxhotyiswe nge-anvil eqhutywa yi-servo ukuze uncede ekuphuculeni ukuchaneka kwee-anvil ezigugileyo.

Isilinda seDie

1. Isilinda sedayi kufuneka sicetyiswe ngokuxhomekeke kwisakhiwo

2. Intsimbi yolwakhiwo lwe-alloy enepleyiti eqinileyo ye-chrome.

3. Imingxunya yezikrufu zokulungisa idayethi ibekwe ngolu hlobo lulandelayo. I-axial yi-100mm, i-radial yi-18mm.

4. Ukuphakama kwesixhobo sokusika idayisi yi-23.8mm.

5. Ubukhulu bomthi wokusika idayisi: 16mm (ibhodi yephepha enamaleko amathathu)

13mm (ibhodi yephepha enamaleko amahlanu)

Isilinda seAnvil

1. Isilinda se-Urethane Anvil

2. Intsimbi yolwakhiwo lwe-alloy enepleyiti eqinileyo ye-chrome.

3. Ubukhulu be-urethane obuyi-10mm (ububanzi obuyi-457.6mm) Ububanzi obuyi-250mm (ubude bokusika obuzizigidi ezisi-8)

Igluer yeFolda

u-asdad (3)

u-asdad (4)

1. Ibhanti yokufunxa

2. I-Inverter eqhutywa kulawulo lokuchaneka kwesithuba

3. Isantya esiguquguqukayo sebhanti yasekhohlo neyasekunene ukuze kube lula ukugoba.

4. Iseti yeemoto ezikwiingalo

I-Counter Ejector

u-asdad (5)

1. Uyilo oluphezulu lokulayisha ukuze kusebenze ngesantya esiphezulu kwaye kungabikho ngozi xa kuqhutywa ngaphandle kweglue lap okanye umsebenzi we-SRP

2. Ibhayisekile eqhutywa yiServo

3. Inani elichanekileyo lebhetshi

Uloliwe wegiya yothumelo oluphambili

1. Sebenzisa intsimbi ye-alloy egayiweyo eyi-20CrMnTi

2. Ukuqina kwe-HRC 58-62 kunika ubomi obude (ukuya kuthi ga kwiminyaka eli-10 ngaphandle kokuguguleka kakhulu)

3. Uqhagamshelo lwasimahla lwesitshixo ukuze kube nokuchaneka kwexesha elide

4. Impompo ye-ooil yegiya ezimbini enesicelo sokutshiza esineendawo ezininzi

IiParamitha zoBugcisa eziPhambili

Inkcazo 2500 x 1200
Isantya esiphezulu (umzuzu) Iphepha le-280Iphakheji engama-20
Ubungakanani bokutya obuphezulu (mm) 2500 x 1170
Ubungakanani beFeeder (mm) 2500 x1400
Ubungakanani obuncinci bokutya (mm) 650 x 450
Indawo yokuPrinta ephezulu (mm) 2450 x1120
Ubukhulu beStereo (mm) 7.2mm
Iiphaneli (mm) 140x140x140x140240x80x240x80
Ubungakanani beMax Die Cutter (mm) 2400 x 1120
Ubukhulu bephepha (mm) 2-10mm

Iimoto kunye neebheringi

Isixa seNkcazelo yeGama

  1. Injini Ephambili (CDQC) 40KW 1
  2. Irola yokuhambisa ukutya 0.1KW 1
  3. Irola Eyaphambili 0.1KW 1
  4. Isango lomsila (eTshayina) 0.12KW 1/30 1
  5. Ukuhambisa Ukutya (eTaiwan) 0.75KW 1/71 2
  6. I-Bezel yasekhohlo neyasekunene (eTshayina) 0.25KW 1/29 2
  7. Iifeni (eTshayina) 5.5KW 2

Iyunithi yePrinta

  1. Uhlengahlengiso lweRoller yerabha (eTaiwan) 0.4KW 1
  2. I-Anilox Lift (eTaiwan) 0.2KW 1
  3. Umsebenzi we-Anilox (eTaiwan) 0.4KW 1
  4. Uhambo lweYunithi (eTaiwan) 0.4KW 1
  5. Ukusebenza kweRoller yerabha (eTaiwan) 0.75KW 1
  6. Ukuguqulwa kweSigaba (eTaiwan) 0.37KW 1/20 1
  7. Itafile Yokuphakamisa (eTaiwan) 0.37KW 1/30 1
  8. I-Tensile (eTaiwan) 0.37KW 1/50 1
  9. Iifeni (eTshayina) 5.5KW 1

Iyunithi yeSlotter

  1. Ukuguqulwa kweSigaba (eTshayina) 0.37KW 1/20 2
  2. Ipleyiti yeSikhokelo esifakwe kwiSlotted (eTshayina) 0.55KW 4
  3. Hambisa iMoto (eTaiwan) 0.4KW 1
  4. Irola yokuhambisa iConveyor 0.1KW 2

Iyunithi Yokusika Idayi

  1. Ukuphakamisa iidayi (eTaiwan) 0.2KW 1
  2. Inkunkuma Yokusika I-Die (eTaiwan) 0.4KW 1
  3. Ukuguqulwa kweSigaba (eTaiwan) 0.37KW 1/20 1
  4. I-Tansile ene (Taiwan) 0.37KW 1/50 1
  5. I-Cut Worm (eTshayina) 1/100 1
  6. Irola yokuhambisa (eTaiwan) 0.1KW 1

Iyunithi yezoThutho

  1. Injini Ephambili (iSiemens) 0.75KW 1
  2. Imoto esecaleni (eTaiwan) 0.4KW 4
  3. Khetha Ingalo (eTaiwan) 0.4KW 2
  4. Phantsi kwaye Susa iMoto (eTaiwan) 0.4KW 2

Iyunithi yokusonga

  1. Imoto yeGlue Wheel (eTaiwan) 0.4KW 1
  2. Ukufuduka kweGlue (eTaiwan) 0.4KW 1
  3. Ifeni yokufunxa (eTshayina) 2.2KW 4
  4. Ifeni yePhepha (eTshayina) 3KW 1
  5. Imoto yoMgca (eTshayina) 0.4KW 2
  6. Phantsi kwaye Ususe Injini (eTaiwan) 1.5KW 2
  7. IMoto eLawulayo (eTaiwan) 37KW 2
  8. Injini yeGesi yoThumelo 0.37KW 1

Iyunithi yokukhupha

  1. Imoto yoThumelo lweeGiya (eTaiwan) 0.75KW 2
  2. Imoto yokuhambisa iphepha (eTaiwan) 1.5KW 2
  3. I-Baffle yangasemva (eTaiwan) 0.55KW 1
  4. Itafile Yokufumana (eTaiwan) 0.37KW 1
  5. I-Baffle yangasemva (eTaiwan) 0.55KW 1
  6. Itafile Yokufumana (eTaiwan) 0.37KW 1
  7. Imoto yoMthwali wePress (eTaiwan) 0.37KW 2
  8. Imoto yeServo yePhepha (eJapan) 3KW 1
  9. I-Servo yePhepha eliXhasayo 5KW 2

Enye Inkcazo

Igama Imvelaphi Isixa

  1. Bearing NSK, C&U Zonke
  2. I-Servo Lead Edge Feeder eJapan (Omron) Zonke
  3. I-Ceramic Anilox Roller Haili, eGuangTai Zonke
  4. I-AC Contactor, i-Thermal Relay i-Nokia Zonke
  5. Zonke iiPLC Japan (Omron)
  6. I-Encoder Italy (ELTRA) Zonke
  7. Zonke iiTouch Screen eSweden (eBeijer)
  8. Indandatho yoQhagamshelo yasimahla eTshayina Zonke
  9. I-Ink Pump yaseTshayina Zonke
  10. I-Inverter yaseJapan (Yaskawa) Zonke
  11. I-Solenoid Valve yaseTaiwan (i-Airtac) Zonke
  12. Imela eTaiwan (Jeefeng) Zonke
  13. I-Anvil Cover Taiwan (Maxdura) Zonke
  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale