ifowuni Ifowuni: +86 21 62999507, 62999806
ico E-mail: info@eureka-machinery.com
English
I-GUOWANG C80 IZENZAKALO EZIZENZEKELAYO ZOKUDAYISA NGOKUPHELELEYO Umfanekiso Ovezwe Phambili
  • I-GUOWANG C80 IZENZAKALO EZIZENZEKELAYO ZOKUDAYISA NGOKUPHELELEYO
  • I-GUOWANG C80 IZENZAKALO EZIZENZEKELAYO ZOKUDAYISA NGOKUPHELELEYO
  • I-GUOWANG C80 IZENZAKALO EZIZENZEKELAYO ZOKUDAYISA NGOKUPHELELEYO
  • I-GUOWANG C80 IZENZAKALO EZIZENZEKELAYO ZOKUDAYISA NGOKUPHELELEYO
  • I-GUOWANG C80 IZENZAKALO EZIZENZEKELAYO ZOKUDAYISA NGOKUPHELELEYO

I-GUOWANG C80 IZENZAKALO EZIZENZEKELAYO ZOKUDAYISA NGOKUPHELELEYO

Iimbonakalo:

Ii-side lays zingatshintshwa ngqo phakathi kwe-draw kunye ne-push mode kumacala omabini omatshini ngokujika nje i-bolt ngaphandle kokongeza okanye ukususa iindawo. Oku kubonelela ngokuguquguquka kokucubungula uluhlu olubanzi lwezinto: nokuba iimpawu zokubhalisa zingasekhohlo okanye ngasekunene kwephepha.

Iilayini ezisecaleni nangaphambili zinezixhobo zokubona ezichanekileyo, ezinokubona umbala omnyama kunye neplastiki. Uvakalelo luyakwazi ukuhlengahlengiswa.

Inkqubo yokutshixa yomoya yenza kube lula ukutshixa nokukhulula ipleyiti yokutshixa nokusika.

Ipleyiti yokusika ephakamisa umoya ukuze kube lula ukungena nokuphuma.

Inkqubo ye-centerline ekulandeleni i-die-cutting kunye nokulungiswa kwe-transversal micro iqinisekisa ubhaliso oluchanekileyo olukhokelela ekutshintsheni umsebenzi ngokukhawuleza.


Iinkcukacha zeMveliso

Olunye ulwazi lwemveliso

ImvelisoIvidiyo

Isishwankathelo seMveliso

Intloko yesondlo esemgangathweni ophezulu

Inkqubo yomgca osembindini

Ukuleqa i-wheat lock ye-pneumatic

Ukondla nokuhambisa ukutya rhoqo

IiSheets ezingama-7500/H

Uxinzelelo lwe-Max.150T

Isikrini sokuchukumisa kabini ukuze kube lula ukusebenza

Isinyithi esityhidiweyo se-HT500-7

Iiparameters zobugcisa

C80

Iinkcukacha zoBugcisa

C80Q20

INTLOKO YOKUTYA I-feeder esemgangathweni ophezulu, ii-sucker ezi-4 kunye nee-forwarder ezi-4

C80Q21

I-FEEDER Isixhobo esifakwe iinqwaba kwangaphambili, Ukutyisa okungayekiyo Ukuphakama kweenqwaba yi-1600mm

C80Q22

IPOMPU YOMOYA YASEJAMANI UBECKER

C80Q23

ITHEYIBHILE YOKUTYA Ibhanti yokuhambisa iNitta Itheyibhile yokuhambisa yentsimbi engatyiwayo

C80Q27

ICANDELO LOKUKHUPHA Inkqubo yomgca osembindini Ukuphakamisa umdyarho ophezulu we-pneumatic Ukwahlula ikhamera ukuya kwindawo yokulawula yomdyarho ophezulu, ophakathi, nophantsi Umgangatho ophezulu wemveliso ngokukhupha ngokuzenzekelayo

C80Q25

ICANDELO ELIQAQAYO I-Servo motor evela eJapan FUJI Uxinzelelo lunokulungiswa kwiscreen sokuchukumisa se-15”, lulungelelanisa ukunyamezela ukuya kuthi ga kuxinzelelo lwe-0.01mm Max.300T

C80Q28

I-LED TICK SCREN MONITOR ●Isikrini sokuchukumisa se-LED esine-15” ephezulu, umqhubi unokujonga zonke izicwangciso kwindawo eyahlukileyo, anciphise ixesha lokutshintsha umsebenzi kwaye aphucule ukusebenza kakuhle.

C80Q30

INKQUBO YOKUTYA Inkqubo yokuthambisa ezenzekelayo elawulwa yikhompyutha Ukulungiswa okulula

C80Q26

ICANDELO ELISIKA UKUFA Inkqubo yomgca osembindini Isitshixo se-pneumatic sokugxotha i-die ephezulu nesezantsi Tshintshela ukuze ubone ukuba iipleyiti zitshixiwe kwindawo echanekileyo

C80Q31

UKUHANJISWA Ukuphakama okuphezulu kwenqwaba 1350mm Ukuhanjiswa okungayekiyo

Iyunithi yokondla

C80Q1
C80Q2
C80Q3

I-feeder esemgangathweni ophezulu eyenziwe eTshayina ngee-suckers ezi-4 zokuphakamisa iphepha kunye nee-suckers ezi-4 zokuhambisa iphepha ziqinisekisa iphepha lokutyisa elizinzileyo nelikhawulezayo. Ukuphakama kunye ne-engile yee-suckers kulula ukuzilungisa ukuze zigcine amaphepha ethe tye ngokupheleleyo.Isixhobo sokufaka iimfumba ngaphambi kokuba zibekwe senza ukutya rhoqo xa zineemfumba ezininzi (Ukuphakama kweemfumba kufikelela kwi-1300mm).

Impompo ye-vacuum ivela kwiGerman Becker.

Ii-side lays zingatshintshwa ngqo phakathi kwe-draw kunye ne-push mode kumacala omabini omatshini ngokujika nje i-bolt ngaphandle kokongeza okanye ukususa iindawo. Oku kubonelela ngokuguquguquka kokucubungula uluhlu olubanzi lwezinto: nokuba iimpawu zokubhalisa zingasekhohlo okanye ngasekunene kwephepha.

C80Q4

Izihlalo ezisecaleni nangaphambili zinezixhobo zokubona ezichanekileyo, ezinokubona umbala omnyama kunye nephepha leplastiki. Uvakalelo luyakwazi ukulungiseka.

C80Q5

Isixhobo esichasene nemiqobo singayiphepha ingozi yomatshini.

C801

Iphaneli yokusebenza yenxalenye yokondla kulula ukuyilawula inkqubo yokondla nge-LED displayer.

Iyunithi yokusika iidayi

C80Q6

Inkqubo yokutshixa yomoya yenza kube lula ukutshixa nokukhulula ipleyiti yokutshixa nokusika.
Ipleyiti yokusika ephakamisa umoya ukuze kube lula ukungena nokuphuma.
Inkqubo ye-centerline ekulandeleni i-die-cutting kunye nokulungiswa kwe-transversal micro iqinisekisa ubhaliso oluchanekileyo olukhokelela ekutshintsheni umsebenzi ngokukhawuleza.
Indawo echanekileyo yokuQokelela iCutting elawulwa zii-precision optical sensors ezinesixhobo sokutshixa esizenzekelayo
Isixhobo sokujika esinqumlezayo

C80Q7

Injini ephambili yeSiemens elawulwa yi-inverter yeSchneider.
Ukulungiswa okuncinci kwamandla okusika (ukuchaneka koxinzelelo kungafikelela kwi-0.01mm ye-encoder, uxinzelelo oluphezulu lokusika idayi lufikelela kwiitoni ezili-150) ngegiya ye-worm eqhutywa yi-servo motor kwaye ilawulwa lula ngesikrini sokuchukumisa se-intshi ezili-15.
I-crankshaft yenziwe ngentsimbi ye-40Cr.
Isinyithi esithambileyo se-HT300 seefreyimu zoomatshini kunye neeplatens
Iiseti ezisi-7 zeebha zegripper ezineegripper ezenziwe nge-alloy ye-aluminium elula nehlala ixesha elide ene-ultra hard coat kunye ne-anodized finish ziqinisekisa ukubhaliswa kwephepha ngokuchanekileyo nangokuhambelanayo.
Ibha yegripper esemgangathweni ophezulu evela eJapan enobomi obude
Ibha yegripper eyilwe ngendlela eyahlukileyo ayifuni sithuba semali ukuze ihlawulwe ukuqinisekisa ukubhaliswa kwephepha ngokuchanekileyo
I-Renold chain esemgangathweni ophezulu evela eNgilane enonyango olusele lulungisiwe iqinisekisa uzinzo kunye nokuchaneka ekuhambeni kwexesha.
Inkqubo yokuqhuba i-index yoxinzelelo oluphezulu yolawulo lokubeka indawo kwi-gripper bar
Isixhobo sokukhusela umthwalo omninzi esinomda we-torque senza ukhuseleko oluphezulu kumqhubi nakumatshini.
Inkqubo yokuthambisa nokupholisa ngokuzenzekelayo kwi-main drive kunye nokuthambisa ngokuzenzekelayo kwi-main chain.

C80Q8

Iyunithi yokuhanjiswa

Ibhrashi yokuqhobosha ehlengahlengiswayo elawulwa yi-AC motor inceda ekukhupheni iphepha kwigripper kunye nokuqokelela iphepha ngesantya esiphezulu kunye nokulungelelaniswa okugqibeleleyo.
Ukuphakama kwenqwaba yokuhambisa kufikelela kwi-1050mm.
Izixhobo zombane ezithintela ukunyuka nokuhla kakhulu kwenqwaba yephepha lokuhambisa
Inqwaba ingabalwa nge-optical sensor (esemgangathweni).
Lo matshini wonke ungalungiswa ngesikrini sokuchukumisa se-intshi ezili-10.4 kwicala elingasemva eliqhagamshelwe kwisikrini esiphambili.
Irakhi yokuhambisa encedisayo yenzelwe ukuhanjiswa okungapheliyo.

Izixhobo zombane

Izixhobo zokubona izinto ze-elektroniki, ii-micro switched kunye nee-photoelectric cells ezilawulwa yi-PLC kumatshini wonke
Iswitshi yekhamera ye-elektroniki ye-Omron kunye ne-encoder
Lonke usebenzo olukhulu lungenziwa nge-touch monitor ye-intshi ezili-15 kunye ne-10.4.
I-PILZ safety relay njengomgangatho iqinisekisa umgangatho wokhuseleko ophezulu.
Iswitshi yangaphakathi yokutshixa iyahlangabezana neemfuno ze-CE.
Isebenzisa izixhobo zombane eziquka iMoeller, iOmron, iSchneider relay, iAC contactor kunye neair breaker ukuqinisekisa uzinzo kwixesha elide.
Ukubonisa iimpazamo ngokuzenzekelayo kunye nokuzixilonga ngokwakho.

  • Ngaphambili:
  • Okulandelayo:

    • Cumfanekisos

    —— ...–

    C80Q32 C80Q33 C80Q40

    IBHOKISI YESALATHISO SASE-TAIWANIbhanti ye-US SynchronicalImoto ye-SIEMENS

    C80Q34C80Q35 C80Q36

    I-UK Renold ChainI-GRIPPER YASEJAPANImpompo kaBecker

    —— ...–

    C80Q37

    UMGANGATHO WEBHODHODI YOKUKHUPHA NOKUKHULULA

    C80Q38

    UYILO LOMGANGATHO

    C80Q39

    ICEBO LAPHANTSI

    —— ...–

    Iyunithi yokuhanjiswa
    Ibhrashi yokuqhobosha ehlengahlengiswayo elawulwa yi-AC motor inceda ekukhupheni iphepha kwigripper kunye nokuqokelela iphepha ngesantya esiphezulu kunye nokulungelelaniswa okugqibeleleyo.
    Ukuphakama kwenqwaba yokuhambisa kufikelela kwi-1050mm.
    Izixhobo zombane ezithintela ukunyuka nokuhla kakhulu kwenqwaba yephepha lokuhambisa
    Inqwaba ingabalwa nge-optical sensor (esemgangathweni).
    Lonke umatshini ungalungiswa ngesikrini sokuchukumisa se-intshi ezili-10.4 kwicala elingasemva
    Irakhi yokuhambisa encedisayo yenzelwe ukuhanjiswa okungapheliyo.

    Izixhobo zombane
    Izixhobo zokubona izinto ze-elektroniki, ii-micro switched kunye nee-photoelectric cells ezilawulwa yi-PLC kumatshini wonke
    Iswitshi yekhamera ye-elektroniki ye-Omron kunye ne-encoder
    Lonke usebenzo olukhulu lungenziwa nge-touch monitor ye-intshi ezili-15 kunye ne-10.4.
    I-PILZ safety relay njengomgangatho iqinisekisa umgangatho wokhuseleko ophezulu.
    Iswitshi yangaphakathi yokutshixa iyahlangabezana neemfuno ze-CE.
    Isebenzisa izixhobo zombane eziquka iMoeller, iOmron, iSchneider relay, iAC contactor kunye neair breaker ukuqinisekisa uzinzo kwixesha elide.
    Ukubonisa iimpazamo ngokuzenzekelayo kunye nokuzixilonga ngokwakho.

    IIdatha yokufakela

    —— ...–

    C80Q10

    Eyona iphambiliizinto

    —— ...–

    C80Q11 C80Q12 C80Q13

    Ikhadibhodi yephepha Ibhodi eqinileyo

    C80Q14 C80Q15 C80Q16

    Iiplastiki eziqinileyo kancinci Ibhodi yekhonkrithi Ifayile yephepha

    —— ...–

    Iisampulu zesicelo

    C80Q17

    C80Q18

    C80Q19

    Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale