Daabacaadda & xabagta xawaaraha sare ee VISTEN Automatic Flexo

Mashiinka jarista Flexo ee otomaatiga ah ee VISTEN

Qaabeynta shaqada iyo xuduudaha farsamada.

I. Cutubka xakamaynta hawlgalka kombiyuutarka

1. Xusuusta eber: nooca mashiinka tirtirka ama qadar yar oo saxan ah oo isbeddelaya inta ay shaqeynayaan mashiinka furan, ka dib marka la xiro mashiinku si toos ah ayuu u soo celin karaa booskii asalka ahaa.

2. Kor u qaadis duuban oo anilox ah oo la xakameeyey: marka koox ku meel gaar ah aysan u baahnayn daabacaad, waxay xakameyn kartaa duubka anilox ee kooxda uma baahna inay hoos u dhacdo, sidaas darteedna uma baahna inay nadiifiso duubka khadka.

3. Si toos ah u jar warqadda: si xor ah u deji waqtiga jarista warqadda si aad uga dhigto hawlgalka mid dabacsan, oo ku habboon caadooyinka hawlgalka shaqsiyeed.

4. Booska eber: mashiinku wuxuu booska saxanka ka dhigi karaa eber si goobta saxanku u noqoto meel, laba kartoon oo tijaabo ah ayaa raadin kara meesha saxda ah.

5.Shaashadda ugu weyn ee mootada ayaa soo bandhigaysa xawaaraha, quudinta, jarista, ka bood.

6. Shaashadu waxay soo bandhigaysaa tirada dalabaadka waxayna dejisaa tirada wax soo saarka dhabta ah, mashiinku si toos ah ayuu u joogsan karaa ka dib marka la dhammeeyo daabacaadda, anilox si toos ah ayuu uga fogeeyaa saxanka.

7. Dalabyada caadiga ah: waxaad u baahan kartaa inaad dalbato si aad u farsameyso dalabaadka shaashadda midabka kombiyuutarka oo keliya waxaad u baahan tahay inaad geliso dhererka kartoonka, ballaca, dhererka iyo ballaca jarista xagasha, adigoo jaraya ballaca shan xog kasta oo sirdoon xog ah si aad u dhammaystirto hoyga ugu dhow; (waxay kaydin kartaa 999 dalab).

Xogtu waxay ka kooban tahay:

(1) Booska daabacaadda ee midab kasta.

(2) Booska Slotter-ka.

(3) Booska sare ee sanduuqa.

(4) Kartoonada ballaca hore, ballaca dhinaca.

(5) Dhererka, ballaca kartoonka iyo wixii la mid ah

Guriga ugu dhow ee caqliga leh si toos ah ka dib marka la geliyo waa la dhammaystiraa iyada oo aan la gelin booska koowaad ee martida hal jiho oo loo maro eber iyo saxanka mindi, dib u fur oo marka hore dib ugu noqo asalka dib-u-hagaajinta hufnaanta shaqada ee hooseysa.

8.Haynta Xogta: Marka xogta si sax ah loo farsameeyo badeecadaha, xogta hadda jirta si toos ah ayaa loo keydiyaa isticmaalka xiga; si toos ah ayaa loo hagaajiyaa iyadoo la raacayo tilmaamaha marka dib loo isticmaalo, taasoo badbaadinaysa waqtiga sharciyeynta hagaajinta.

II. Cutubka quudinta (hal cutub)

Saxnaanta quudinta: ± 1mm

1. Qalabka mashiinka

(1) Qalabka xakamaynta korontada oo lagu dhejiyay gambaleel, digniinta garaaca ayaa sii socotay, si loo hubiyo badbaadada shaqaalaha hawlgalka.

(2) Taleefanka dhulka iyo Taiwan, badhanka joojinta degdegga ah ee aaladaha ayaa noqon kara kantarool gudaha ah si loo joojiyo dhaqdhaqaaqa mashiinka, si loo hubiyo amniga shaqaalaha hawlgallada gudaha.

(3) Qalabka isku xidhka hawada ee pneumatic-ka.

(4) Habka qufulka oo dhan.

2.Nidaamka nuugista boodhka

(1) Waxaa lagu qalabeeyay mashiin jajaban oo ka saaraya boodhka, tiro badan si looga takhaluso wasakhda dusha sare ee daabacaadda kartoonka, loona hagaajiyo tayada daabacaadda.

3.Quudinta duubista

Dhexroorka dibadda ee duubka quudinta sare waa Φ142.68mm.(1200)

(2) Tuubo aan tolnayn, caag la xiran karo oo duuban, iyo si loo sameeyo sixitaanka dheellitirka.

Roogga quudinta ee hoos ku yaal waa Φ157.45mm iyo dahaadhka chrome-ka adag ee la embossed (1200)

(4) Farqiga roogga quudinta hagaajinta qalabka dixiriga, kala duwanaanshaha hagaajinta waa 0-12mm

.4. Set labaad oo ah duubista quudinta sare iyo hoose

(1) Tuubo aan tolnayn, oo lagu duubay caag aan xirnayn, iyo si loo sameeyo sixitaanka dheelitirka.

Duubka hoose ee dhexroorka dibadda waa Φ157.45mm iyo dahaadhka chrome-ka adag ee la embossed. (1200)

(3) Farqiga wareegga quudinta ayaa qof walba hagaajiya, kala duwanaanshaha hagaajinta waa 0-12mm.

5. Xakamaynta hawlgalka ee quudinta otomaatiga ah

(1), ku shub hareeraha birta, riix kartoonka ka dib marka la hagaajiyo korantada kartoonka baloogga ah, iyo shaqada jarista warqadda

(2), nidaamka quudinta ee kaalmeeya nuugista laadadka dambe, iyadoo loo eegayo heerka foorarsiga kartoonka, ayaa sameeya hagaajinta mugga hawada. (Nidaamka quudinta geeska rasaasta ee xakamaynta servo ee ikhtiyaariga ah)

(Shirkaddayadu waxay soo saartaa geeska ugu horreeya ee habka quudinta warqadda ee xakamaynta servo, oo leh xuquuq hanti aqooneed oo madax-bannaan, dhaqaaluhuna aad buu u cad yahay, kaliya waa in lagu beddelo suunka waqtiga caadiga ah ee hubin kara isticmaalka caadiga ah ee quudinta geeska raadraac isku-dhafan, beddel gudbinta aan kala go 'lahayn ee roogga quudinta iyo astaamo kale oo cusub, si wax ku ool ah u hubin kara saxnaanta quudinta, si looga fogaado dib-u-dhaca aan lagu xallin karin gudbinta kamaradda farsamada, xirashada iyo jeexitaanka farsamada ka dib isticmaalka muddada dheer, dhibka beddelka roogga quudinta, xasillooni-darrada gudbinta xawaaraha sare iyo arrimo kale.)

III. Qaybta daabacaha (hal midab hal set) (Nidaamka xoqidda ee ikhtiyaariga ah)

Saxnaanta daabacaadda: ± 0.5mm

1. Rullaluistemka daabacaadda

1)Dhexroorka dibadda Φ393.97mm (dhexroorka saxanka oo ka kooban waa Φ393.97mm).(1200)

Dhexroorka dibadda Φ443.2mm (dhexroorka saxanka oo ka kooban waa Φ457.6mm). (1400)

2), shiidi dusha sare, dahaadhka chrome-ka adag.

3), Sixitaanka dheelitirka firfircoon iyo kan aan joogtada ahayn, hawlgal siman.

4), Nooca mugga go'an ee Ratchet ee usha.

5), Waxay qaadataa habka laalaadinta si loogu rakibo si ku habboon oo degdeg ah, nooca 10mm ee laalaadinayo ee maqaalka

6), rarista iyo dejinta saxanka daabacaadda, kontoroolka korontada ee badhanka cagta oo rogrogaya.

2. Daabacaadda duubista embossing

1)Dhexroorka dibadda ee Φ172.2mm.(1200)

2) Shiidi dusha sare ee biibiile bir ah, dahaadhka chrome-ka adag.

3),Sixitaanka dheelitirka, hawlgal siman

4）））））））））：Miisaanka gacanta ku hagaaji farqiga hagaajinta farqiga duubista ee daabacaadda ee 0-12mm

3, duub anilox bir ah (duubista anilox dhoobada ah ee ikhtiyaariga ah)

1)Dhexroorka dibadda ee Φ206.65mm.(1200)

2) Dusha sare ee birta ah ee la xardhay oo leh habayn gaar ah.

3), dhibic, xitaa khad, waara, oo waara.

4), waxay kordhinayaan waqtiga ay ku jiraan cimriga saxanka iyo duubka caagga ah, oo lagu xardhay hab gaar ah.

4, duubista caagga ah

1)Dhexroorka dibadda ee 外径为Φ211mm.(1200)

2), bir lagu dahaadhay caag u adkaysta daxalka.

3), duubis caag ah oo gaar ah oo shiidi kara, saameyn khad ah.

5, habka hagaajinta wejiga

1)Qaab-dhismeedka qalabka meeraha.

2) Marxaladda tilmaamaha bandhigga dijitaalka ah si loo sameeyo hawlgal ka sahlan, dareen leh oo sax ah.

3) , Marxaladda daabacaadda oo leh xakamaynta shaashadda taabashada PLC iyo hagaajinta dijitaalka ah ee korontada ku shaqeeya ee 360 ​​(joojinta hawlgalka waa la hagaajin karaa). Saxnaanta isbeddelka wejiga oo ah ilaa 0.15 mm.

4) , Beddelaha duubista daabacaadda ayaa loo isticmaalaa in lagu hagaajiyo wejiga, firfircoonida iyo istaandarka marka la eego hagaajin kasta oo booska ah, saxnaanta hagaajinta ilaa 0.10 mm, sida kala-baxa goobta ayaa had iyo jeer dib ugu noqon kara eber ka dib marka cutubka laga saaro, saxnaanta ilaa 0.5 mm.

6, Wareegga khad

1), bamka khad ee pneumatic-ka ah, xasilloonida khad, hawlgal fudud iyo dayactir.

2), qalabka nadiifinta khad gobolka, kaas oo si wax ku ool ah u badbaadin kara khad.

3), shaandhada khadku, shaandhee wasakhda.

7, qalabka marxaladda daabacaadda

1), farsamada biriiga biriiga ee elektromagnetic-ka ah.

8, habka hagaajinta axial-ka

1), farsamada hagaajinta dhidibka korontada.

2), tilmaame booska nooca bandhigga dijitaalka ah, ka dhig hawlgalka mid aad u habboon, dareen leh oo sax ah.

IV. Cutubka Slotter (hal set)

Saxnaanta booska: ± 1.5mm

1, giraangir silig ah

Dhexroorka usha Φ154mm, ka dib laba shiidi, chrome-ka adag lagu dahaadhay, dhaqdhaqaaq siman. (1200)

2））））））））））））））：Hagaajinta gacanta ee miisaanka, kala duwanaanshaha hagaajinta waa 0-12mm.

3) Xariiqda cadaadiska ee ku wareegsan isticmaalka polyurethane tayo leh oo la soo dhoofiyay

2. Mindi Slot farsamo sixitaanka simbiriirixan

1)Dhexroorka usha Φ174mm ka dib laba shiidi, chrome-ka adag lagu dahaadhay, dhaqdhaqaaq siman. (1200)

2) Ballaca mindi ee godan oo ah 7mm.

3), Mindi bir ah oo lagu daweeyay kulayl, shiidid iyo adkaysi waa mid aad u fiican. (Taiwan)

4) Birta daawaha ka dib daaweynta kulaylka, mindi jarista shiidi, mindi fiiqan, iyo saxnaan sare.

5) Giraangiraha khadka cadaadiska, duubka hagaha, booska mindi-godka, isticmaalka xakamaynta isku-dubaridka badhanka korantada.

6)、Garabka khadka cadaadiska, duubka hagaha, booska mindi-godka, isticmaalka xakamaynta isku-dubaridka badhanka korantada.

Habka hagaajinta wejiga ee godan

1), qaab-dhismeedka qalabka meeraha.

2), ka hor inta aan la gelin wejiga daloolinta, ka dib mindi leh shaashad taabasho iyo kontorool laba jibbaaran oo koronto ah iyo dhijitaal koronto oo 360 darajo ah (joojinta waxaa si firfircoon loogu hagaajin karaa).

3), dhaqdhaqaaqa toosan ee mindi godan ayaa qaata hagaajinta korantada (joojinta firfircoonida waa la hagaajin karaa).

VI. Nidaamka Xabagta:

1. Dayactir fudud, yareynta kharashyada dayactirka.

2. Wareegga nuugista bamka Peristaltic, yaraynta qashinka koolada.

Cutubka Gaadiidka:

Waxay la qabsan kartaa dhumucda kala duwan ee kartoonka iyadoo la adeegsanayo qalab hagaajinaya farqiga, waxayna ka heshaa saxaafadda laga soo saaro kartoonka toosan.

Cutubka Laablaaban:

1. Rakibaadda nidaamka cusub ee laablaabashada, oo ku habboon laablaabashada saxda ah, jarista farqiga ayaa noqon kara kor iyo hoos.

2. Isticmaalka suunka ugu weyn ee nooca nuugista, si siman u daadinta marxaladda ugu dambeysa ee kartoonka laalaaban karo, geesaha kartoonka si looga hortago qallooca.

3. Suun laba laab ah oo bidix iyo midig ah oo leh darawal matoor oo gaar ah, iyadoo loo eegayo dhererka iyo ballaca cabbirrada xawaaraha si gaar ah loo xakameeyey.

Cutubka Tirinta iyo Ka saarista

1. Kaarboor yar ayaa si habsami leh u gaari kara socodsiinta xawaaraha sare.

2. Nooca dibadda ku xiran, godka la qaadi karo, nooca hawo-mareenka ayaa sidoo kale noqon kara mid deggan, si habsami leh u dheji sanduuqa warqadda.

Cutubka Hawlgalka:

1. Hagaaji shaashadda taabashada LCD-ga midabka leh, waxaad soo bandhigi kartaa macluumaad kala duwan oo ku saabsan digniinta iyo macluumaadka hawlgalka.

2. Ku guuleyso kontoroolka fog.

VII. Qalabka gudbinta

Qalabka ugu muhiimsan ee wadista

1), oo ay sameeyeen birta daawaha 20CrMnTi, kaarburizing iyo gears-ka shiidi.

2), lix sax ah (la mid ah) oo leh hawlgal siman oo qalabka gear-ka otomaatiga ah, buuq yar, adkaanta HRC58-62, cimri dheer, oo aan ka yarayn 10 sano oo xirasho iyo jeexitaan aasaasi ah, waxay gaari kartaa calaamado daabacaad muddo dheer ah.

2. Giraanta isku xirka

1), Giraanta isku xirka bilaashka ah, waxaa lagu xiri karaa usha iyo qalabka, isticmaalka wareegga weyn ma kala go'i doono, rakibidda iyo dayactirkana way ku habboon tahay, waxay u oggolaanaysaa mashiinka inuu wado saxnaan sare oo muddo dheer ah si loo hubiyo diiwaangelinta daabacaadda.

VIII. Xuduudaha farsamada ee ugu muhiimsan