Mashiinka Jarida Laser Dieboard JLSN1812-JL1500W-F
1. Wadada iftiinka laysarka oo go'an (Madaxa laysarka waa go'an yahay, qalabka jarista ayaa dhaqaaqa); wadada laysarka waa go'an tahay, dammaanad qaad in farqiga jarista uu isku mid yahay.
2. Boorka kubbadda dhulka lagu shubay ee saxnaanta sare leh, saxnaanta iyo cimriga la isticmaalay ee la soo dhoofiyay ayaa ka sarreeya boorka kubbadda la duubay.
3. Tilmaamaha toosan ee tayada sare leh uma baahna dayactir muddo 2 sano ah; waqtiga shaqada ee ugu horreeya ee dayactirka.
4. Jirka mashiinka oo xoog badan iyo xasilin sare leh, qaab-dhismeedka marinnada isgoyska ah, miisaankiisuna yahay qiyaastii 1.7T.
5. Nidaamka jarista madaxa laser-ka ee sabbaynaya, Si toos ah ugu habboon leexashada, dhumucda iyo dhererka kala duwan, dammaanad qaad farqiga jarista dhammaantood isku mid.
6. Nidaamka xakamaynta mashiinka ee aan boodhka u adkaysan karin ee Autocephaly, heerka hawo-celinta: IP54, dammaanadda nidaamka xakamaynta mashiinka oo shaqeynaya.
7. Nidaamka xakamaynta dijitaalka ah ee Jarmalka, oo ay ku jiraan xakamaynta korontada jarista laysarka, hawlgalka jirka mashiinka, hawlgalka nidaamka laysarka iyo shaqada tiknoolajiyada jarista khibradda iwm; xawaare sare, saxnaan sare iyo xasillooni sare, xaqiijinta farqiga jarista laysarka ee qumman.
8. Madaxa laser-ka wuxuu qaataa qaabka khaanadaha ee muraayadda; aad bay ugu habboon tahay beddelka iyo nadiifinta.
| Nooca laysarka | 1500W Jialuo laser koronto |
| Goobta shaqada | 1820*1220MM |
| Jidka khadka leysarka | Waddo laysar ah oo go'an (madaxa laysarka waa la hagaajiyay, jirka mishiinkuna waa la dhaqaajiyey) |
| Qaabka wadista | Kubbado la soo dhoofiyay oo sax ah oo dhulka hoostiisa ah |
| Qalabka jarista iyo dhumucdiisuna | 6-9-15-18-22mm alwaax alwaax ah, loox PVC ah, akrilik iyo walxo bir ah oo ka yar 4mm |
| Heerkulka deegaanka | 5℃-35℃ |
| Heerkulka biyaha qaboojinta | 5℃-30℃ |
| Biyaha qaboojinta | Biyo saafi ah |
| Gaaska ilaalinta | aan saliid lahayn iyo hawo qalalan |
| Qoyaanka qiyaasta ah | ≤80% |
| Awoodda bixinta | Saddex waji 380V ± 5% 50/60HZ, 30KVA |
| Xawaaraha jarista | 0-14000mm/daqiiqo (dejinta software-ka, alwaax 18mm ah: 1500mm/daqiiqo) |
| Dulqaadka jarista | 0.025mm/1250 |
| Dulqaad soo noqnoqda | ≤0.01mm |
| Guddiga xakamaynta hawlgalka | 15 'LCD, guddi kontorool xirfadeed oo nidaamka jarista laysarka ah |
| Dekedda gudbinta | RS232 Isku xirka gudbinta khadka saafiga ah/USD |
| Software-ka xakamaynta | Nidaamka xakamaynta laysarka dhijitaalka ah ee Jarmalka PA8000/Nidaamka xakamaynta laysarka dhijitaalka ah ee xirfadlayaasha Shiinaha |
