GW XAASHIDA SAXDA AH EE JARJARAYA S140/S170
Sida laga soo xigtay farsamada GW ee wax soo saarka, mishiinku waxaa inta badan loo isticmaalaa xaashida warqadda ee Warshadda Warqadda, Guriga Daabacaadda iyo iwm, inta badan habka waxaa ka mid ah: Furitaanka—Jarista—Gudbinta—Ururinta,.
1. Xakamaynta shaashadda Siemenstouch waxaa loo isticmaalaa in lagu dejiyo oo lagu soo bandhigo cabbirka xaashida, tirinta, xawaaraha la jaro, gudbinta is dulsaaran, iyo waxyaabo kaloo badan. Xakamaynta shaashadda taabashada waxay la shaqaysaa Siemens PLC.
2. Saddex qaybood oo ah qalab jarista nooca xiirashada si ay u yeeshaan jaris iyo jaris xawaare sare leh, siman oo aan awood lahayn, oo leh hagaajin degdeg ah iyo quful. Haystaha mindiyaha ee adkaysiga badan ayaa ku habboon jarista xawaaraha sare ee 300m/daqiiqo.
3. Suunka xawaaraha dheereeya/gaaban waxaa xakameeya qalabka wax lagu beddelo ee aan tallaabada lahayn, kaas oo si toos ah ula socda xawaaraha mindiyaha isla markaana hagaajiya xawaaraha suunka, si warqadda si fiican loogu dulmaro.
4. Rullaluistemka mindiyaha sare wuxuu leeyahay habka jarista ee Ingiriiska si uu si wax ku ool ah u yareeyo culeyska iyo buuqa inta lagu jiro jarista warqadda, iyo in la dheereeyo cimriga jarista. Rullaluistemka mindiyaha sare waxaa lagu dahaadhaa bir aan miridh lahayn si loo farsameeyo saxnaanta, waxaana si firfircoon loogu dheellitiraa inta lagu jiro hawlgalka xawaaraha sare.
Kursiga qalabka hoose waxa laga sameeyay bir la shubay oo si buuxda loo sameeyay, ka dibna si sax ah loo farsameeyay, oo leh xasillooni wanaagsan.
Dusha sare ee duubista firfircoon waxaa loogu talagalay khadadka ballaarinta, dhululubadana waxaa loo isticmaalaa in lagu xakameeyo cadaadiska iyo xoqidda warqadda ee jirka duubista.
Mindi goynta wareega ah waxay ka samaysan tahay bir bir ah oo gaar ah oo bir ah, oo leh cimri dheer iyo hagaajin fudud oo daab ah.Daboolka badbaadada si toos ah ayuu u xidhmi doonaa marka daboolka badbaadada la furo, taasoo hubinaysa badbaadada.
| Moodel | GW-S140/S170 |
| 1. Nooca jarista | Daabka sare oo wareegaya, daabka hoose oo go'an |
| 2. miisaanka warqadda | 60-550 GSM |
| Dhexroorka giraangiraha 3.. | Ugu badnaan 1800mm |
| 4. Ballaca la dhammeeyay | Ugu badnaan 1400mm/1700mm |
| 5. Dhererka xaashida oo dhammaystiran | Ugu yaraan.450-ugu badnaan.1650 mm |
| 6. Tirada jarista duubabka | 2 duub |
| 7. Saxnaanta jarista | ±0.3mm |
| 8. Xawaaraha ugu badan ee jarista | 350jaritaan/daqiiqad |
| 9. Xawaaraha ugu badan ee jarista | 300m/daqiiqo |
| 10. Dhererka raaska keenista | 1500mm |
| 11. Shuruudaha cadaadiska hawada | 0.8MPa |
| 12. Danab | AC380V/220Vx50Hz |
| 13. Awoodda ugu weyn ee matoorka: | 11KW |
| 13. Wax soo saar | Wax soo saarka dhabta ah wuxuu ku xiran yahay agabka, iyo miisaanka warqadda, iyo habka saxda ah ee loo shaqeeyo |
| 1. | Gacanta laba-jibbaaran ee aan lahayn shaft-ka oo la jaanqaadaysa istaagga |
| 2. | Nidaamka Ururinta Gooynta Dhexe iyo Qashinka Cidhifkiisa |
| 3. | Gooye xaashi wareeg ah oo hal-rogid ah oo sax ah oo sarreeya |
| 4. | Nidaamka Hagaajinta Qaab-dhismeedka |
| 5. | Nidaamka Tirtiridda Maqalka ah |
| 6. | Nidaamka Qaadista Warqadda |
| 7. | Qalabka tirinta otomaatiga ah iyo gelinta calaamadda |
| 8. | Nidaamka Bixinta iyo Jiidista Gawaarida |
| 9. | Nidaamka Wadista Mootada |
| 10. | Nidaamka Wadista Mootada |
| 11. | Muraayadda laba-laaban ee matoorka leh |
| 12. | Xakamaynta cadaadiska otomaatiga ah |
| 13. | Otomaatig-EPC (Xakamaynta Warqadda Geesaha) |
1. Gacanta laba-jibbaaran ee aan lahayn shaft-ka oo isbedbeddelaysa oo istaagta
1）Dhexdhexaadka ugu badan ee giraangiraha: 1800mm
2) Ballaca ugu badan ee giraangiraha: 1400mm/1700mm
3) Ballaca ugu yar ee giraangiraha: 500mm
4) Cabbirka xudunta: 3"6"12"
5) Wadista Haydarooliga: 3.5kw
6) Gacanta qabsashada hore ama gadaal u dhaqaaq oo ay waddo haydarooliga
7) Gacanta kor ama hoos u dhig oo ay ku shaqeyso haydarooliga
8) Nidaamka biriiga ee sambabbada
9) Qoob-ka-ciyaarka oo leh qalab la xiriira
2. Nidaamka Ururinta Gooynta Dhexe iyo Qashinka Cidhifkiisa
1) Qaab mindi goyn ah oo la hagaajin karo iyo tuubada qiiqa ee loogu talagalay geeska qashinka labada dhinac
2) Gooyaha Sare: Kor ama hoos ayaa loo hagaajin karaa, ballaca goynta waxaa gacanta lagu hagaajin karaa
3) Gooyaha hoose Gooyaha waa go'an yahay, ballaca goynta waxaa lagu hagaajin karaa gacanta
4) Jarista mashiinka faakuumka qashinka: oo ay wadaan matoor 1.5kw ah
5) Tuubada ururinta nooca-Y ee loogu talagalay geeska qashinka
3. Gooye xaashi wareeg ah oo sax ah oo hal-rogid ah
1) Mindi Rotary Top ah oo la qabsanaysa habka jarista ee Ingiriiska, si loo yareeyo buuqa iyo culayska loona dheereeyo cimriga mindi,
2) Qalabka Qalabka Hoose ee Duubista waqtiga ku habboon, ka dibna farsamaynta, oo leh astaamo xasillooni.
3) Roogga wadista ugu weyn: dusha sare ee hadhuudhka leh, oo ay xakamayso cadaadiska hawada si loo qabto warqadda
4. Nidaamka Hagaajinta Labajibbaaran
1) Nooca: Qalabka loo yaqaan 'Tool Arron' oo loo hagaajiyay habka Ingiriiska, waxtar badan.
2) Habka Xakamaynta: Labajibbaaran oo warqad ah iyadoo loo eegayo cabbirka shaqaalaha.
5. Nidaamka Tirtiridda Joogtada ah
1) Nooca: Bar-ka-hortagga ah, wuxuu baabi'in karaa static-ka ku jira xaashida.
6. Nidaamka Gudbinta Warqadda
1) Nooca: Gaadiid toosan oo leh marxalado badan si loo tiriyo loona tuso si habboon (qalab ururin boodh oo hufnaan sare leh)
2) Marxaladda ugu horreysa ee gudbinta si dhakhso ah loo kala saaro warqadda jarista
3) Marxaladda labaad ee gudbinta Si aad u hesho qaab warqad ah oo u eg foornada oo leh xawaare gaabis ah, hal ama kontorool isku xiran
4) Marxaladda gaarsiinta gaarsiinta Qalabka kala soocida ee la safeeyey wuxuu xoojin karaa xasilloonida wuxuuna ka fogaan karaa leexashada warqadda.
7. Siemens PLC, Darawalka iyo matoorka INVT Servo, inverter-ka Schneider, qaybaha korontada ee la soo dhoofiyay
8. Tirinta otomaatiga ah iyo gelinta calaamadaynta qalabka
1） Nooca: Geli ka dib marka si sax ah loo tiriyo
2) Hawsha:
A, Ka dib markii aad tirada qaybaha warqadda ku geliso HMI,
markaas waxay u shaqayn kartaa sida waafaqsan shuruudaha.
B, Dib u buuxi badeecad cilladaysan
9. Nidaamka Bixinta iyo Jiidista Gawaarida
1) Nooca: Si toos ah ayuu hoos ugu dhacaa marka warqaddu ay gaarto dherer gaar ah.
2) Dhererka xidhmooyinka warqadda
3) Cabbirka warqadda la dhammeeyay
4) Miisaanka Stacker
5) Jogger: Ugu badnaan.1500mm, W=1400mm, L=1450mm, 2500kg, Jogger nooca firfircoon ee hore iyo labada dhinac; nooca adiustable dabada.
10. Matoor laba jibbaaran
Qalabkan cusub ee loo sameeyay wuxuu simi karaa warqadda qaro weyn
natiijo aad uga wanaagsan tan caadiga ah ee decurler-ka
nidaamka, kaas oo u sahlaya mashiinkan inuu si dhab ah u shaqeeyo
loox ilaa 1000gsm
11. Auto-EPC (Xakamaynta Warqadda Geesaha)
Af-xidhka dareenka saxda ah oo si fudud loo heli karo oo xasaasi ah
Si dhakhso ah ayuu u ogaadaa khadadka shabakadda ee kala duwan ee nidaamka EPC.
12. Xakamaynta cadaadiska otomaatiga ah
Dhexroorka warqadda duubista iyo tirada miisaanka warqadda geli shaashadda taabashada, xiisadda waxaa si toos ah u xakameyn doona kombuyuutarka. Sawirka loogu talagalay nidaamka hagitaanka shabakadda ee 4 duub.
13. Nidaamka Wadista Matoorka
1) Matoorka servo-ka AC ee dib u soo celinta daab2) Matoorka AC ee warqadda gudbiyaha3) Matoorka rogaal celiska ee suunka labaad ee rarista4) Matoorka AC-ga ee kor iyo hoos u socda ee Stacker5）Matoorka AC-ga ee loogu talagalay orodka hore6) Matoorka AC-ga ee loogu talagalay warshadaha dabaysha ee qashinka lagu ururiyo7) Matoorka AC-ga ee loogu talagalay meesha lagu nasto
| 1. | Daab HCT |
| 2. | Jeexjeex pneumatic ah |
| 3. | Dhererka jarista 2000mm |
| 4. | Dhererka tuulmada 1650mm |
| 5. | Ka saarista boodhka |
| 6. | Raad-raaca cursor-ka |
| 7. | Xakamaynta amniga xad-dhaafka ah iyo nidaamka badbaadada isku-xidhka |
1. Daab HCT ah
2. Jeexjeex pneumatic ah
3. Dhererka jarista 2000mm
4. 1650mm Dhererka Tuulada
5. Ka saarista boodhka
6. Raad-raaca cursor-ka
7. Xakamaynta amniga ee xad-dhaafka ah iyo nidaamka badbaadada isku-xidhka
| MAGACA QAYBTA | SUMMAD | DALKA ASALKA AH |
| Dhalista | NSK/HRB | Jabaan/Shiinaha |
| Darawalka Servo | INVT | Shiinaha |
| Relay | IDEC | Jabaan |
| PLC | Siemens | Jarmalka |
| Beddelaha Soo Noqnoqda | INVT | Shiinaha |
| Beddelaha Soo Noqnoqda | INVT | Shiinaha |
| Matoorka Adeegga | INVT | Shiinaha |
| Thermaorelay | TAIAN | Taiwan |
| Beddel korontada | MW | Taiwan |
| Kormeere | Siemens | Jarmalka |
| Contactor-ka AC-ga | TAIAN | Taiwan |
| Matoorka Inverter-ka | Siemens | Jarmalka |
| Xakamaynta neef-mareenka | SMC | Jabaan |
| Jabiyaha wareegga | LS | Kuuriya |
| Beddelka u dhowaanshaha | FOTEK | Taiwan |
| Suunka waqtiga | OPIT | Jarmalka |
| Suunka gudbiyaha | Sambla | ganacsi wadajir ah |
| Matoorka | WANSHSIN | Taiwan |
2 giraangirood oo dabacsan
4 giraangirood oo dabacsan
Iyada oo loo marayo iskaashiga lala leeyahay lammaane heer sare ah oo adduunka ah, Guowang Group (GW) waxay leedahay shirkad iskaashi oo wadajir ah oo ay weheliso lammaane Jarmal ah iyo mashruuca OEM-ga caalamiga ah ee KOMORI. Iyada oo lagu saleynayo tignoolajiyada horumarsan ee Jarmalka iyo Jabbaan iyo in ka badan 25 sano oo waayo-aragnimo ah, GW waxay si joogto ah u bixisaa xalka ugu fiican uguna waxtarka badan ee ka dambeeya saxaafadda.
GW waxay qaadataa xalka wax soo saarka ee horumarsan iyo heerka maaraynta 5S, laga bilaabo R&D, iibsashada, farsamaynta, isu imaatinka iyo kormeerka, hab kasta si adag ayuu u raacaa heerka ugu sarreeya.
GW waxay maalgelisaa wax badan CNC, waxay soo dejisaa DMG, INNSE-BERADI, PAMA, STARRAG, TOSHIBA, OKUMA, MAZAK, MITSUBISHI iwm. oo ka kala yimaada adduunka oo dhan. Kaliya sababtoo ah waxay raadineysaa tayada sare. Kooxda CNC ee xooggan ayaa ah dammaanad adag oo ku saabsan tayada alaabtaada. GW, waxaad dareemi doontaa "saxnaanta sare iyo saxnaanta sare"
