ZTJ-330 Intermittent Offset Label Press
| Max. saizi yekudhinda | 320*350mm |
| Max. Die cutter size | 320*350mm |
| Kufara kwepepa | 100-330mm |
| Ukobvu hwe substrate | 80-300g/m2 |
| Dzokorora urefu | 100-350mm |
| Press speed | 30-180rpm (50m/min) |
| Motokari rating | 30kw/6mavara |
| Simba | 380V, 3 zvikamu |
| Pneumatic chinodiwa | 7kg/cm2 |
| Plate | PS Plate |
| PS Plate Ukobvu | 0.24mm |
| Doro | 12%-10% |
| Mvura | Around 90% |
| Mvura Tembiricha | 10 ℃ |
| Kudhinda Cylinder Diameter | 180mm |
| Rubber Sheeting | 0.95mm |
| Ink Rubber | 23pcs |
| Impression Rubber | 4pcs |
| Max speed | 8000sheets/h |
| Saizi yakakura yekumhanya | 720*1040mm |
| Min sheet size | 390*540mm |
| Max kudhinda nzvimbo | 710*1040mm |
| Ukobvu (huremu) hwepepa | 0.10-0.6mm |
| Feeder murwi urefu | 1150mm |
| Delivery murwi kureba | 1100mm |
| Zvose simba | 45kw |
| Zvose zviyero | 9302*3400*2100mm |
| Gross huremu | Inenge 12600kg |
 | Chechipiri pass sensor |
 |
Rotary die cutter
|
 |
UV Vanish (flexo unit)
|
 |
Ink roller
|
 | CCD Kamera (BST, Germany) |
 | Webhu gwara |
 | Magetsi controller bhokisi |
 | Sarudzo: inki kure |
 | Laminating uye rewinder unit |
 | UV dryer |
 | Mukati memufananidzo (ichi chimiro chinotungamira tekinoroji yenyika) |
5colors+ 1 flexo UV vanish+ 1 rotary die cutter
5 mavara + Turn bar
6 mavara
6colors+ 1 flexo UV vanish+ 1 rotary die cutter
1 Flexo unit+ 5colors+ 1 flexo UV vanish+ 1 rotary die cutter
6 mavara+ 1 inotonhora foil+ 1 flexo UV vanish+ 1 rotary die cutter
7 mavara+ 1 flexo UV vanish+ 1 rotary die cutter
| ●DONGORA SYSTEM | ||
| Tsanangudzo | Cherechedza | Brand Name |
| Computer control system | Multi-axis control system | Trio----------UK |
| Bata skrini yemuchina mukuru | 12inch, multicolor | Proface-----Japan |
| PLC |
| Mitsubishi---Japan |
| PLC inowedzera module |
| Mitsubishi---Japan |
| Frequency converter | 400W | Mitsubishi---Japan |
| Frequency converter | 750W | Mitsubishi---Japan |
| Coder |
| Omron-------Japan |
| Shandura、Bhatani |
| Fuji----------Japan Schneider---France |
| Contactor
| Simon-----Germany | |
| Analogy module
|
| Mitsubishi---Japan |
| Kuchinja magetsi |
| Zvakanaka----Taiwan |
| Aviation plug uye terminal block |
| Hangke----Taiwan |
| ● CHINHU CHEMWE CHEKUPINDA | ||
| Tsanangudzo | Cherechedza | Zita rechiratidzo |
| Servo injini | 3KW | Panasonic-----Japan |
| Servo mota mutyairi | Panasonic-----Japan | |
| Speed reducer | APEX----------Taiwan | |
| Frequency converter | Mitsubishi----Japan | |
| Proximity detector | Omron---------Japan | |
| Air cylinder | SMC------------Japan | |
| Kutungamirira Kwakarurama | HIWIN--------Taiwan | |
| Tevera Rapid-kufamba mota | 200W | Jingyan------Taiwan |
| Speed reducer | Jingyan------Taiwan | |
| Ingi rabha | Basch---------Shanghai | |
| Coder | Omron-------Japan | |
| Bearing | NSK-------Japan | |
| Limit switch | Omron----Japan | |
| Ink roller | BASCH------Shanghai | |
| ●MATERIAL FEDED SYSTEM 1 | ||
| Tsanangudzo | Cherechedza | Brand Name |
| Servo injini | 3KW | Panasonic-----Japan |
| Servo mota mutyairi | Panasonic-----Japan | |
| Special decelerator | APEX---------Taiwan | |
| Photocell ye unwinder | Omron--------Japan | |
| 2nd pass sensor
|
| Kurwara----------Germany
|
| Air cylinder
| SMC--------Japan | |
| ●MATERIAL FEDED SYSTEM 2 | ||
| Tsanangudzo | Cherechedza | Brand Name |
| Motor | 200W | Jingyan----Taiwan |
| Speed reducer | Jingyan----Taiwan | |
| Frequency converter | 200V/0.4KW | Panasonic-----Japan |
| ●REWINDER SYSTEM | ||
| Tsanangudzo | Cherechedza | Brand Name |
| Rewinder mota | L28—750W—7.5S | Chenggang-----Taiwan |
| pombi yeperipheral | China | |
| Frequency converter |
| Panasonic-----Japan |
| Switch | Schneider (France) | |
| Rewinder sensor | Omron-------Japan | |
| ● WEB-PASSING SYSTEM | ||
| Tsanangudzo | Cherechedza | Brand Name |
| Servo injini | 3KW | Panasonic-----Japan |
| Servo mota mutyairi | Panasonic-----Japan | |
| Speed reducer | APEX--------Taiwan | |
| Air cylinder | SMC-----------Japan | |
1) Servo inotyairwa: Yakazvimirira servo inofambiswa system mune yega yega unit kuvimbisa yakagadzikana rejista pakumhanya kwekudhinda kukuru.
2) Dhinda unit: Shandisa iyo yakanyanya dhizaini inking system ine makumi maviri nenhatu inking rolls, mana mahombe emafomu emafomu anosanganisirwa uye doro damping system kuvimbisa kunaka kwekudhinda.
3) Pre-register sisitimu: Zvichienderana nehurefu hwekudhinda, pinda data muchiteshi chekudzora chinotsvedza, imwe neimwe unit inongozogadziriswa kune yayo yakagadzirira.
4) Rejista sisitimu: Yega yega yekudhinda unit inogona kure kurejisa rejista iyo inosanganisira mutsara, lateral uye skewing pasina kumisa muchina kuchengetedza nguva uye kuderedza kutambisa kwe substrate.
5) Vacuum backflow control unwinding: Vacuum backflow cylinder inofanirwa kukwanisa kudzivirira zvikwambo kuseri kweP/S label panguva yekufamba kwepakati.
6) Joystickless: Yakazara otomatiki otomatiki sisitimu inosanganisira kudzvanywa kwekugadzirisa, inking roll washup, roller impression, nezvimwe.
7) Nyore kushanda: Yakashongedzerwa neinotsvedza touch screen control station iyo inogona kufamba-famba kuti iwedzere kugona kweanoshanda.
8) Saizi yekudhinda: Tekinoroji yakashongedzwa kudzikisa saizi yekudhinda kuti iwane hukuru hukuru hwekusiyana saizi kudhinda.
9) Kudzora sisitimu: Isa chikamu chemagetsi kubva kune yakakurumbira mhando yepasirese kuvimbisa kushanda kwakavimbika kwenguva refu.
10) Lubrication system: Centralized otomatiki lubrication.
