SAIOB-Te Tānga Flexo Momi Korehau me te Mokowā me te Tapahi Mate me te Piripiri i te Raina
| Ingoa | Te nui |
| Wāhanga whāngai (Whāngai Mata Ara) | 1 |
| Wāhanga pūreretā (Roera anilox uku + Mata) | 4 |
| Wāhanga whakapūmau (Pouaka whakapūmau takirua) | 1 |
| Wāhanga tapahi mate | 1 |
| Wāhanga whakapiri aunoa | 1 |
SAIOB-Te momi korehau Flexo Tā me te Mokowā me te tapahi mate me te whakapiripiri i te raina
(Whirihoranga mahi me ngā tawhā hangarau)
Wāhanga whakahaere rorohiko
1. Ka whakamahia e te mīhini te mana rorohiko, me te taraiwa servo a Hapani.
2. Kei ia waeine he mata pa HMI, he māmā noa te whakahaere, he tika te whakarerekētanga me te kore aunoa.
3. Te mahi mahara: ina whakaurua ngā raraunga tika ka tiakina aunoa mō te whakamahinga e whai ake nei. Te mahi mahara 9999.
4. Ka taea te whakarerekē takitahi i ngā raraunga, me te kore e whakamahi i te mahi tono. Ka taea e te kaiwhakahaere te whakahaere aunoa i ngā raraunga whakauru motuhake mā te whakamahi i te pūnaha whakatū pouaka kotahi. Ka taea te whakauru i te roa, te whānui me te teitei o te pouaka, ā, ka whakatū aunoa te wae mokowā.
5. Ka taea te whakarite motuhake i te mīhini, ā, ka whakahoutia ngā raraunga hou ina whakaatuhia, ka taea e te kaiwhakahaere te kite i te hapa o te mīhini kei te mahi.
6. Pūnaha tārua mēnā ka ngaro te mahara. Ka taea te whakahoki mai i ngā raraunga.
7. Mēnā me whakatuwhera te mīhini i a ia e oma ana, ka hoki aunoa te mīhini ki tōna tūranga taketake ina kati.
8. Ka hiki aunoa i te anilox hei ārai i te horoinga kore e hiahiatia.
9. Ka whakaatuhia te tere, te whāngai, te oma o te motuka matua e te mata matua
10. Ka whakaatuhia te raupapatanga o te huinga i te mata matua, ā, ina puta te tau tuturu, ka mutu aunoa te whāngai, ā, ka ara aunoa te anilox mai i te pereti.
11. Kei te wātea ngā momo kātene kua whakaritea.
12. Ka kitea ngā rahi katoa.
13. E toru tau te roa o ngā whakahoutanga pūmanawa kore utu.
Ka whakamahia e te wae whāngai te hangarau whāngai mata mata JC, e tika ana mō ngā momo whariki kowakawaka katoa.
He roera whāngai e peia ana e ngā motuka servo e 4, kāore he hapa tuku miihini.
Ka taea te whakarite i te pēhanga hau korehau kia rite ki te rahi o te pepa.
Roera whāngai rapa takirua o runga me te diameter 147.6mm
Roera chome mārō rino o raro takirua me te whānui 157.45mm
Te whakarerekētanga ā-mīhini me te whakaaturanga matihiko (0-12mm)
He mea whakauru ki te tango paru me te puehu. Mā tēnei ka tangohia te nuinga o te puehu i runga i te mata tā, ā, ka pai ake te kounga o te tā.
Mā tēnei pūnaha momi, ka whakaitihia te kino ki te pepa kowakawaka, ā, ahakoa ngā panonitanga iti ki te matotoru o te papa, kāore te kounga o te tānga e pāngia.
Ka taea te whakarite i te wae whāngai mā te ringa, mā te motuka me te mana rorohiko CNC.
Mā te Auto Zero ka taea e te mīhini te whakatuwhera, te mahi whakarerekē, te kati me te whakahoki ki te kore, ā, ka penapena i te wā o te kaiwhakahaere.
He taputapu ā-ringa ngā wae tā katoa, ā, he taputapu angiangi hoki ō rātou mata, kia maeneene ai te oma.
Whakawhitihia mā te korehau hei whakarite i te tika o te tānga ki te +-0.5mm.
Ko te diameter o waho he 393.97 (ko te diameter o te pereti tā he 408.37mm)
Te whakatikatika i te taurite pumau me te hihiri, te mahi maeneene.
He mata whenua kua whakakikoruatia ki te konukōre mārō.
Āpitihanga orooro mā te pūnaha raka tere.
Ka taea te taraiwa i te rango tīwharawhara mā te pētara waewae o te kaiwhakahaere hei whakatakoto.
1. Ko te whānui o waho he 172.2mm
2. Huri mata maitai, whakakikoruatia ki te konukōre mārō.
3. Te whakatikatika taurite me te whakahaere maeneene.
4. Ka whakaritea te whakatikatika o te nip tā mā te rorohiko me te mana mamati hiko.
1. Ko te whānui o waho he 236.18mm.
2. Te turanga maitai me te paninga uku.
3. Whakairohia ki te rēseri kia rite ki ngā whakaritenga a te kiritaki.
4. Hoahoa huringa tere mō te tiaki watea
1. Ko te whānui o waho he 211mm
2. He maitai kua pania ki te rapa ātete waikura
3. Whakakotahitia ki te karauna
5. He rūma hiri konumohe i hangaia mō te motuhake, ka taea te penapena i te 20% o te moumou waituhi.
6. Kua whakakikoruatia ki te paparanga PTFE matomato, he ngāwari ki te horoi, ā, kāore e piri.
7. Kei te wātea te whakamahi i te tikanga anilox tere-huri hei kōwhiringa.
1. Taputapu aorangi me te whakarerekētanga 360 nekehanga
2. Ka taea te whakarite i te tūranga taha mā te hiko mā te mana pa PLC, tae atu ki te tawhiti o te 20mm, me te whakatikatika moroiti tae atu ki te 0.10mm.
3. Ko te whakatikatika porowhita mā te mata pa PLC me te nekehanga 360
4. Te whakatikatika iti mā te inverter mō te whakatikatika pai tae atu ki te 0.10mm
1. Mā te papu diaphragm hau ka pumau te waituhi, ka māmā te whakahaere me te tiaki.
2. Whakatūpato mō te waituhi iti.
3. Tātari waituhi hei whakakore i ngā poke.
1. Ko te whānui o te kakau he 154mm, he whakakikoruatia ki te kōrome mārō.
2. Ka whakarerekētia te pēhanga mā te hiko mai i te 0-12mm, ā, ka whakaaturia mā te whakaaturanga matihiko.
1. He 174mm te whānui o te kakau, he mea whakakikorua ki te kōrome mārō.
2. Ko te whānui o te maripi kōhao he 7mm.
3. He maitai whakapakeke ngā maripi, he mea huri kōhao, he mea whakakoi.
4. Maripi tapahi tino tika e rua ngā wahi.
5. Ka whakatakotoria te teihana mokamoka mā te mata pa PLC me te mahara ota 1000.
Kaiwhakautu
1. Kaiwhakakapi taputapu aorangi, whakatikatika whakamuri 360 tohu.
2. Ka whakamahia te PLC, te mana pa, me te whakatikatika hiko matihiko 360, hei whakatikatika i te maripi whakamua me te maripi whakamuri.
Kōwhiringa taputapu poka-ā-ringa
1. Me ngā papa konumohe me ngā huinga taputapu tapahi-mate e rua (whānui 110).
Wāhanga whakamaroke infrared (kōwhiringa)
1. Wāhanga whakamaroke āwhina korehau; puku servo motuhake.
2. Tuku āwhina korehau wira katoa.
3. Ka taea te whakarerekē i te wera kia rite ki te rahi o te pepa.
4. Tēpu whakawhiti ka taea te hiki.
Wāhanga Tapahi-Mate (kotahi te huinga)
Ka taea te whakarite hiko i te rango mate me te āputa paepae mā te whakaaturanga mamati.
Ngā Mahi Whakahaere
1. Ka whakatuwheratia aunoatia te rango me te paepae ina kore e whakamahia hei whakamama i te pānga ki te mīhini, hei whakaroa hoki i te roa o te ora o te urethane.
2. He 10mm te whakarerekētanga whakapae o te rango mate.
3. Kua whakauruhia te rango Anvil ki te mahi hopu aunoa tae atu ki te 30mm, e tohatoha ōrite ana ki ngā wāhi katoa, ā, e whakaroa ana i te ora.
4. Kei te mīhini te tukutahitanga o te paepae e peia ana e te servo hei āwhina i te whakapai ake i te tika o ngā paepae kua pakaru.
Porotaka Mate
1. Me tohutohu te rango mate i runga i te āhua
2. He maitai hanganga koranu me te pereti chrome mārō.
3. Ko te tawhiti i waenganui i ngā kōhao tīwiri whakapiri mate he rite ki te tuaka 100mm, te tuara 18mm.
4. Teitei o te taputapu tapahi 23.8mm.
5. Te matotoru o te rakau tapahi mate: 16mm (papa pepa paparua e toru)
13mm (pepa paparanga e rima)
Porotaka Anvil
1. Puoto Urethane Anvil
2. He maitai hanganga koranu me te pereti chrome mārō.
3. Te matotoru o te urethane he 10mm (te whānui 457.6mm) Te whānui 250mm (te roa o te tapahi 8 miriona)
Kōpaki Piripiri
1. Whitiki momi
2. He mea whakatere te inverter hei whakahaere i te tika o te āputa
3. Tere rerekē mō te whitiki maui me te whitiki matau kia tika ake ai te kopa.
4. Huinga motuka kei runga i ngā ringa
Kaitatau Whakaputa
1. Hoahoa utaina runga mō te whakahaere tere-teitei maeneene me te kore tukinga ina oma ana i waho o te papa piripiri, i te mahi SRP rānei
2. Huringa e peia ana e te servo
3. Te tatau puranga tika
Te tereina taputapu tuku matua
1. Whakamahia he maitai koranu whenua, he mea whakakākahu ki te waro 20CrMnTi
2. He roa te ora o te HRC 58-62 mā te pakeke (tae atu ki te 10 tau me te iti o te pakaru)
3. Hononga kore kī mō te tika mō te wā roa
4. papu hinu taputapu rua me te paninga rehu maha-ira
| Whakatakotoranga | 2500 x 1200 |
| Tere mōrahi (min) | 280 rau20 Pūkete |
| Rahi Whāngai Mōrahi (mm) | 2500 x 1170 |
| Rahi o te Whāngai Peke (mm) | 2500 x1400 |
| Rahi Whāngai Iti rawa (mm) | 650 x 450 |
| Te rohe tānga mōrahi (mm) | 2450 x1120 |
| Matotoru o te Reo Tīwhara (mm) | 7.2mm |
| Ngā Paewhiri (mm) | 140x140x140x140240x80x240x80 |
| Rahi Tapahi Mate Mōrahi (mm) | 2400 x 1120 |
| Te matotoru o te rau (mm) | 2-10mm |
Ingoa Whakatakotoranga Tapeke
- Mōta Matua (CDQC) 40KW 1
- Rōra Kawe Whāngai 0.1KW 1
- Te Rōra Whakamua 0.1KW 1
- Kēti o muri (Haina) 0.12KW 1/30 1
- Te Nekehanga Whāngai (Taiwan) 0.75KW 1/71 2
- Matau Mauī me Matau (Haina) 0.25KW 1/29 2
- Ngā Pā (Haina) 5.5KW 2
Wāhanga Pūreretā
- Whakatikatika Rōra Rapa (Taiwan) 0.4KW 1
- Anilox Lift (Taiwan) 0.2KW 1
- Te Mahi Anilox (Taiwan) 0.4KW 1
- Te Nekehanga Wāhanga (Taiwan) 0.4KW 1
- Te Mahi Rōra Rapa (Taiwan) 0.75KW 1
- Te Whakarerekētanga Wāhanga (Taiwan) 0.37KW 1/20 1
- Tēpu Hiki (Taiwan) 0.37KW 1/30 1
- Te Pūwero (Taiwan) 0.37KW 1/50 1
- Ngā Pā (Haina) 5.5KW 1
Wāhanga Mokowā
- Te Whakarerekētanga Āhua (Haina) 0.37KW 1/20 2
- Pereti Arataki Mokowā (Haina) 0.55KW 4
- Nekehia te Mōta (Taiwan) 0.4KW 1
- Rōra Kawe 0.1KW 2
Wāhanga Tapahi Mate
- Te Hiki Mate (Taiwan) 0.2KW 1
- Para Tapahi Mate (Taiwan) 0.4KW 1
- Te Whakarerekētanga Wāhanga (Taiwan) 0.37KW 1/20 1
- Te Kume me (Taiwan) 0.37KW 1/50 1
- Te Tapahi i te Noke (Haina) 1/100 1
- Rōra Kawe (Taiwan) 0.1KW 1
Wāhanga Kawe
- Mōta Matua (Siemens) 0.75KW 1
- Mōta taha (Taiwan) 0.4KW 4
- Ringa Whiri (Taiwan) 0.4KW 2
- Whakaheke me te Tango i te Mōta (Taiwan) 0.4KW 2
Wāhanga Whakapiko
- Mōta Wira Piri (Taiwan) 0.4KW 1
- Nekehanga Piri (Taiwan) 0.4KW 1
- Pā Momi (Haina) 2.2KW 4
- Pā Pepa (Haina) 3KW 1
- Mōta Raina (Haina) 0.4KW 2
- Motuka Whakaheke me te Tango (Taiwan) 1.5KW 2
- Mōta Whakahaere (Taiwan) 37KW 2
- Mōta Āputa Tuku 0.37KW 1
Wāhanga Whakaputa
- Mōta Tuku Taputapu (Taiwan) 0.75KW 2
- Mōta Kawe Pepa (Taiwan) 1.5KW 2
- Pūwero Whakamuri (Taiwan) 0.55KW 1
- Tēpu Whiwhinga (Taiwan) 0.37KW 1
- Pūwero Whakamuri (Taiwan) 0.55KW 1
- Tēpu Whiwhinga (Taiwan) 0.37KW 1
- Mōta Kawe Pēhi (Taiwan) 0.37KW 2
- Mōta Mahi Pepa (Hapani) 3KW 1
- Ratonga Pepa Tautoko 5KW 2
Whakaahuatanga kē atu
Ingoa Takenga Moni
- Te peera NSK, C&U Katoa
- Whāngai Mata Mata Servo Hapani (Omron) Katoa
- Roera Anilox Uku Haili, GuangTai Katoa
- Kaiwhakapā AC, Whakapā Wera Siemens Katoa
- PLC Hapani (Omron) Katoa
- Kaiwhakamāori Itari (ELTRA) Katoa
- Mata Pā o Huitene (Beijer) Katoa
- Mowhiti Hononga Koreutu Haina Katoa
- Papu Waituhi Haina Katoa
- Inverter Japan (Yaskawa) Katoa
- Takirere Solenoid Taiwan (Airtac) Katoa
- Maripi Taiwan (Jeefeng) Katoa
- Taupoki Paepae Taiwan (Maxdura) Katoa
