GW Daidaitaccen Takardar Yankan S140/S170
A cewar fasahar samfurin GW, ana amfani da injin ne musamman don yin takarda a cikin Injin Takarda, Gidan Bugawa da sauransu, galibin hanyoyin sun haɗa da: Buɗewa—Yankewa—Gudanarwa—Tattarawa,.
1. Ana amfani da na'urorin sarrafa allon Siemenstouch don saitawa da nuna girman takarda, ƙidaya, rage saurin isarwa, haɗuwar isarwa, da ƙari. Na'urorin sarrafa allon taɓawa suna aiki tare da Siemens PLC.
2. Na'urar yankewa nau'in yankawa guda uku don samun babban gudu, santsi da ƙarfi, tare da daidaitawa da kullewa cikin sauri. Mai riƙe wuka mai ƙarfi ya dace da yankewa mai sauri na mita 300/min.
3. Ana sarrafa bel ɗin saurin gudu/sanyi ta hanyar mai canza mita mara stepless, wanda ke bin diddigin saurin wuka ta atomatik kuma yana daidaita saurin bel ɗin, don haka takardar za ta iya haɗuwa daidai.
4. Na'urar yanke wuka ta sama tana da hanyar yanka wuka ta Burtaniya don rage kaya da hayaniya yadda ya kamata yayin yanke takarda, da kuma tsawaita rayuwar mai yankewa. Ana haɗa na'urar yanke wuka ta sama da bakin karfe don yin aikin daidai, kuma ana daidaita ta sosai yayin aiki mai sauri.
Kujerar kayan aiki ta ƙasa an yi ta ne da ƙarfen siminti wanda aka ƙera shi gaba ɗaya sannan aka yi shi da siminti, sannan aka sarrafa shi daidai gwargwado, tare da kyakkyawan kwanciyar hankali.
An tsara saman na'urar juyawa mai aiki da layukan faɗaɗawa, kuma ana amfani da silinda don sarrafa matsin lamba da matse takarda na jikin na'urar juyawa.
An yi wukar yankewa mai juyawa da injinan ƙarfe na musamman, tare da tsawon rai da sauƙin gyara ruwan wukake.Murfin tsaro zai rufe ta atomatik lokacin da aka buɗe murfin tsaro, wanda ke tabbatar da aminci.
| Samfuri | GW-S140/S170 |
| 1. Nau'in yankewa | Ruwan sama mai juyawa, an gyara ruwan ƙasa |
| 2. nauyin takarda | 60-550 GSM |
| 3.. diamita na reel | Matsakaicin 1800mm |
| 4. Faɗin da aka gama | Matsakaicin 1400mm/1700mm |
| 5. Tsawon takardar da aka gama | Matsakaici.450-Matsakaicin.1650 mm |
| 6. Yawan yanka biredi | Naɗi 2 |
| 7. Daidaiton yankewa | ±0.3mm |
| 8. Matsakaicin saurin yankewa | Yankuna 350/minti |
| 9. Matsakaicin saurin yankewa | 300m/min |
| 10. Tsawon tarin kaya | 1500mm |
| 11. Bukatar matsin lamba na iska | 0.8MPa |
| 12. Wutar lantarki | AC380V/220Vx50Hz |
| 13. Babban ƙarfin mota: | 11KW |
| 13. Fitarwa | Ainihin fitarwa ya dogara ne akan kayan aiki, da nauyin takardar, da kuma tsarin aiki mai kyau. |
| 1. | Tsayar da hannu mara shaftless mai juyawa a matsayi biyu |
| 2. | Tsarin Tattara Tsabtace Tsabta da Sharar Gida na Tsakiya |
| 3. | Babban daidaitaccen mai yanka takardar juyawa guda ɗaya |
| 4. | Tsarin Daidaita Murabba'i |
| 5. | Tsarin Kashewa Mai Tsayi |
| 6. | Tsarin Na'urar Jawo Takarda |
| 7. | Na'urar ƙirgawa ta atomatik da saka lakabi |
| 8. | Tsarin Isarwa da Mota na Jogger |
| 9. | Tsarin Motar Tuki |
| 10. | Tsarin Motar Tuki |
| 11. | Injin cirewa mai motsi biyu |
| 12. | Sarrafa tashin hankali ta atomatik |
| 13. | Auto-EPC (Manajan Takardar Gefen) |
1. Sassa biyu na hannu mai jujjuyawa ba tare da shaft ba
1）Mafi girman diamita na faifai: 1800mm
2）Matsakaicin faɗin faifai: 1400mm/1700mm
3) Faɗin ƙaramin faifai: 500mm
4) Girman tsakiya: 3"6"12"
5) Tuki mai amfani da ruwa: 3.5kw
6) Hannun da aka yi amfani da shi wajen motsa gaba ko baya ta hanyar amfani da injin hydraulic
7) Cire hannun sama ko ƙasa ta hanyar amfani da na'urar hydraulic
8) Tsarin birki na huhu
9) Naɗin rawa tare da maƙallin da ke da alaƙa
2. Tsarin Tattara Tsabtace Tsakiya da Sharar Shara
1) Salon da za a iya daidaita shi da kuma bututun sharar gida don gefen sharar gida a ɓangarorin biyu
2) Babban abin tsagewa Mai daidaitawa sama ko ƙasa, ana iya daidaita faɗin yankewa da hannu
3) Rage ƙasan rabe-raben an gyara shi, ana iya daidaita faɗin rabe-raben ta hanyar hannu
4) Gyara injin hura sharar gida: injin 1.5kw ne ke tuƙa shi
5) Bututun tattarawa na nau'in Y don gefen sharar gida
3. Babban madaidaicin abin yanka takarda mai juyawa guda ɗaya
1) Wukar Rotary Mafi girma tana ɗaukar hanyar yankewa ta Burtaniya, don rage hayaniya da kaya da kuma tsawaita rayuwar wuka,
2) Akwatin Kayan Aiki na Ƙasa da aka yi amfani da shi a kan lokaci, sannan aka sarrafa shi, wanda ke da alaƙa da kwanciyar hankali.
3) Babban abin nadi mai tuƙi: saman da ke da santsi, wanda iska ke sarrafawa don riƙe takardar
4. Tsarin Daidaita Murabba'i
1) Nau'i: Akwatin Kayan Aiki wanda aka gyara a matsayin hanyar Burtaniya, mafi inganci.
2) Hanyar Sarrafawa: Murabba'in takarda bisa ga daidaito ta hanyar ma'aunin ma'aikata.
5. Tsarin Kashewa Mai Tsayi
1) Nau'i: Maɓallin hana tsayawa, zai iya kawar da tsayayyen abu a cikin zanen gado.
6. Tsarin jigilar takarda
1) Nau'i: Jigilar kaya a kwance tare da matakai da yawa don ƙirgawa da tattarawa cikin sauƙi (kayan aikin tattara ƙura masu inganci)
2) Mataki na farko na isar da sako Don raba takarda da sauri
3) Mataki na biyu na jigilar kaya. Tsarin tayal mai kama da takarda mai saurin gudu, mai sauƙin sarrafawa ko haɗin kai.
4) Matakin isar da kaya Na'urar rabawa mai kyau na iya ƙarfafa kwanciyar hankali da kuma guje wa karkacewar takarda.
7. Siemens PLC, Direban Servo da injin INVT, inverter na Schneider, kayan lantarki da aka shigo da su daga ƙasashen waje
8. Ƙirgawa ta atomatik da saka lakabin na'urar
1) Nau'i: Saka bayan ƙidaya daidai
2) Aiki:
A, Bayan shigar da adadin takardu a cikin HMI,
to zai iya aiki bisa ga buƙatu.
B, Sake cike samfurin da ke da lahani
9. Tsarin Isarwa da Mota
1) Nau'i: Yana sauka ta atomatik lokacin da takarda ta taru har zuwa wani tsayi.
2) Tsawon tarin takarda
3) Girman takarda da aka gama
4) Nauyin Stacker
5) Jogger: Matsakaicin. 1500mm, W = 1400mm, L = 1450mm, 2500kg, Jogger mai motsi don gaba da bangarorin biyu; ƙofar baya mai iya canzawa.
10. Injin cirewa mai motsi biyu
Wannan sabon na'urar cire gashi (decurler) da aka ƙera za ta iya daidaita takarda mai kauri
tare da sakamako mafi kyau fiye da na'urar cirewa ta al'ada
tsarin, wanda ke ba da damar wannan injin kusan yin aiki mai kauri
allon har zuwa 1000gsm
11. Auto-EPC (Gudanar da Takardar Gefen)
Nozzle ɗin da aka fi sani da shi wanda yake da sauƙin samu kuma mai sauƙin fahimta
Fast yana gano layukan yanar gizo daban-daban don tsarin EPC.
12. Kula da tashin hankali ta atomatik
Sanya diamita na takardar da nauyin takarda a cikin allon taɓawa, kwamfuta za ta sarrafa matsin lamba ta atomatik. Hoto don tsarin jagorar yanar gizo mai birgima 4.
13. Tsarin Mota Mai Tuƙi
1) Motar AC servo don dawo da ruwan wukake2) Motar AC don takardar jigilar kaya3) Injin inverter don madaurin jigilar kaya na biyu4）Motar AC don hawa da sauka na Stacker5) Motar AC don jogger na gaba6) Injin AC don injin niƙa mai amfani da iska don tattara sharar gida7) Motar AC don tsayawa hutawa
| 1. | Ruwan HCT |
| 2. | Ragewar iska |
| 3. | Tsawon yankewa 2000mm |
| 4. | Tsawon tarin 1650mm |
| 5. | Cire ƙura |
| 6. | Bin diddigin maɓalli |
| 7. | Tsarin kula da tsaro mai yawa da tsarin tsaro na haɗin gwiwa |
1. Ruwan HCT
2. Rage iskar huhu
3. Tsawon yankewa na 2000mm
4. 1650mm Tsawon tarin
5. Cire ƙura
6. Bin diddigin na'urar auna sigina
7. Tsarin kula da tsaro mai yawa da kuma tsarin tsaro na haɗin gwiwa
| SUNAN SASHE | ALAMA | ƘASA TA ASALI |
| Bearing | NSK/HRB | Japan/China |
| Direban Servo | INVT | China |
| Relay | IDEC | Japan |
| Kamfanin PLC | Siemens | Jamus |
| Mai Canza Mita | INVT | China |
| Mai Canza Mita | INVT | China |
| Motar hidima | INVT | China |
| Thermaorelay | TAIAN | Taiwan |
| Canja wutar lantarki | MW | Taiwan |
| Allon Kulawa | Siemens | Jamus |
| Mai hulɗa da AC | TAIAN | Taiwan |
| Injin Inverter | Siemens | Jamus |
| Kula da huhu | SMC | Japan |
| Mai karya da'ira | LS | Koriya |
| Maɓallin kusanci | FOTEK | Taiwan |
| Belin lokaci | OPIT | Jamus |
| Belin jigilar kaya | Sampl | haɗin gwiwa |
| Mota | WANSHSIN | Taiwan |
Mai sassauta ƙafafu 2
Mai sassauta ƙafa 4
Ta hanyar haɗin gwiwa da babban abokin tarayya a duniya, Guowang Group (GW) tana da kamfanin haɗin gwiwa tare da abokin tarayya na Jamus da kuma aikin OEM na KOMORI na duniya. Dangane da fasahar zamani ta Jamus da Japan da kuma fiye da shekaru 25 na gwaninta, GW tana ci gaba da bayar da mafi kyawun mafita mafi inganci bayan an buga jaridu.
GW ta rungumi tsarin samar da kayayyaki na zamani da kuma tsarin gudanarwa na 5S, daga bincike da ci gaba, saye, yin aiki, haɗawa da dubawa, kowane tsari yana bin ƙa'idar mafi girma.
GW yana saka hannun jari sosai a CNC, yana shigo da DMG, INNSE-BERADI, PAMA, STARRAG, TOSHIBA, OKUMA, MAZAK, MITSUBISHI da sauransu daga ko'ina cikin duniya. Kawai saboda yana bin babban inganci. Ƙungiyar CNC mai ƙarfi ita ce garantin ingancin samfuran ku. A cikin GW, za ku ji "ingantaccen inganci da daidaito"
