Injin lamination na sarewa mai sauri na EUFM ta atomatik
Ana iya yi wa takardar laminate da takarda don ƙara ƙarfi da kauri na kayan ko tasirin musamman. Bayan yankewa, ana iya amfani da shi don akwatunan marufi, allunan talla da sauran dalilai.
| Samfuri | EUFM1450 | EUFM1650 | EUFM1900 |
| Matsakaicin girma | 1450*1450mm | 1650*1650mm | 1900*1900mm |
| Ƙaramin girman | 380*400mm | 400*450mm | 450*450mm |
| Takarda | 120-800g | 120-800g | 120-800g |
| Takarda ta ƙasa | ≤10mm allon corrugated ABCDEF ≥300gsm kwali | ≤10mm allon corrugated ABCDEF ≥300gsm kwali | ≤10mm ABCDEF allon da aka yi da corrugated ≥300gsm kwali |
| Matsakaicin saurin laminating | 150m/min | 150m/min | 150m/min |
| Ƙarfi | 25kw | 27kw | 30KW |
| Daidaiton sanda | ±1.5mm | ±1.5mm | ±1.5mm |
1. CIYAR DA TAKARDAR ASALIN
Yi amfani da tsarin sarrafa wutar lantarki na injin Servo da aka shigo da shi, tare da bel ɗin tsotsa na NITTA na Japan don yin inverter na wutar lantarki, da kuma bel ɗin da aka tsaftace ta hanyar na'urar birgima ta ruwa; Fasaha mai lasisi don tabbatar da cewa corrugate da kwali suna fita cikin sauƙi kuma cikin sauƙi.
2. Tsarin ciyar da takardar sama
Ana iya daidaita bututun ɗaga takarda da ciyarwa na mai ciyarwa mai sauri ta atomatik don daidaitawa da takarda mai siriri da kauri. Tare da famfon Becker, tabbatar da cewa takardar ciyarwa ta sama tana aiki da sauri da kuma lanƙwasa.
3.TSARIN WUTAR LANTARKI
An ƙera kuma an rungumi tsarin sarrafa motsi na Amurka Parker tare da tsarin Yaskawa Servo da inverter, Siemens PLC don tabbatar da cewa injin yana aiki a mafi girman gudu da daidaito a matsayin ingantaccen aiki da kwanciyar hankali na aiki.
4. KASHIN KAFIN TARKO
Tsarin pre-taro tare da aikin da aka saita za a iya saita shi azaman girman takarda ta hanyar allon taɓawa kuma a daidaita shi ta atomatik don rage lokacin saitawa yadda ya kamata.
5. Tsarin Watsawa
Ana amfani da bel ɗin daidaitawa na ƙofofi tare da bearing na SKF a matsayin babban watsawa don tabbatar da kwanciyar hankali. Ana iya daidaita na'urorin juyawar matsin lamba, na'urar juyawa da ƙimar manne cikin sauƙi ta hanyar riƙewa tare da na'urar ɓoyewa ta injiniya.
6. Tsarin Matsayi
Photocell tare da na'urar Parker Dynamic da tsarin Yaskawa Servo suna tabbatar da daidaiton daidaiton takarda ta sama da ƙasa. Na'urar naɗa manne mai bakin ƙarfe tare da niƙa anilox mai kyau don tabbatar da daidaiton murfin manne ko da a ƙaramin adadin manne.
7. Allon taɓawa da kuma daidaitawa ta atomatik
Ana iya saita tsarin takarda ta hanyar Na'urar Kula da Taɓawa mai inci 15 kuma a mayar da shi ta hanyar injin inverter ta atomatik don rage lokacin saitawa. Ana amfani da yanayin atomatik ga na'urar da aka riga aka shirya, na'urar ciyarwa ta sama, na'urar ciyarwa ta ƙasa da na'urar sanyawa. Maɓallin jerin Eaton M22 yana tabbatar da tsawon lokacin aiki da kyawun injin.
8. MAI TUƘIN KWAIKWAYO
Na'urar jigilar kaya mai ɗagawa tana sauƙaƙa wa mai aiki sauke takarda. Na'urar jigilar kaya mai tsayi tare da bel ɗin matsi don sa aikin da aka yi wa laminate ya bushe da sauri.
9. TSARIN MAN SHAFA NA AUTOMATIC
Famfon shafawa na atomatik don duk manyan bearings yana tabbatar da ƙarfin injin ko da a ƙarƙashin yanayin aiki mai nauyi.
ZAƁUƁU:
1. JAGORAN TSARIN CIYAYYA TA GEFE
Gefen gubar yana tabbatar da cewa allon da aka yi da corrugated kamar yadudduka 5 ko 7 yana aiki cikin sauƙi koda kuwa a ƙarƙashin yanayin warkewa sosai.
2. Mai ciyar da kayan aiki na shaftless
Ana amfani da ciyarwar servo mara shaft don ƙarin dogon takarda a motsi mai sassauƙa.
3. ƘARIN KARIYA DA JUYIN JUYA TSARO
Ƙarin murfin rufewa a kusa da na'urar don ƙarin taimakon tsaro. Motar tsaro don tabbatar da cewa maɓallin ƙofa da E-stop suna aiki akai-akai.
