Injin yankewa na atomatik mai faffadan gado MWZ1450QS don kwali mai corrugated
An gina shi don saurin saiti, aminci, kayan aiki masu faɗi da rage lalacewar zanen gado.
-Wannan MWZ 1450S yana iya ɗaukar allon ƙarfi (min.200gsm) da allon corrugated na sarewa ɗaya da bangon BC mai kauri biyu, BE har zuwa 7mm.
- Mai ciyarwa zai bayar da ciyarwar kwarara don allon mai ƙarfi yayin da ake ciyar da takarda ɗaya don zanen gado mai rufi.
- Teburin ciyarwa tare da Ja da Tura Side Lay don daidaito.
- Jikin injin da aka yi da gear da ƙarfe don aiki mai santsi da kwanciyar hankali na injin.
- Tsarin layin tsakiya wanda aka sanye shi da kayan aiki don dacewa da nau'ikan yankewa da ake amfani da su a cikin masu yanke kayan mutuwa na wasu samfuran. Kuma don bayar da saurin saita injin da canje-canje a aiki.
- Cikakken aikin cirewa (tsarin cirewa sau uku da na'urar cire sharar gefen gubar) don jin daɗin farashin aiki da rage lokacin isarwa ga abokan cinikin ku.
- Tsarin isar da kaya mai yawa ba tare da tsayawa ba.
- Tsarin busa takarda da tsarin buroshi a sashen bayarwa musamman don cikakken tattarawa.
- An sanya na'urori da na'urori masu auna hoto da yawa don kare masu aiki daga rauni da kuma kare injin daga aiki mara kyau.
- Duk sassan da aka zaɓa kuma aka haɗa an gina su ne don ingantaccen aiki da kuma dogon lokaci.
| Samfurin injin | MWZ 1450QS |
| Matsakaicin girman takardar | 1480 x 1080mm |
| Mafi ƙarancin girman takardar | 600 x 500mm |
| Matsakaicin girman yankewa | 1450 x 1050mm |
| Matsakaicin ƙarfin yankewa | Tan 300 |
| Matsakaicin gudun injina | Takardu 5,200 a kowace awa |
| Saurin samarwa | 2,000 ~ 5,000 s/h dangane da yanayin aiki, ingancin takarda da ƙwarewar aiki, da sauransu. |
| Jerin hannun jari | Takardar da aka yi da corrugated har zuwa 7mm Allon da aka yi da ƙarfi 200-2000gsm |
| Tsawon dokar yankewa | 23.8mm |
| Daidaita matsin lamba | ±1.5mm |
| Daidaiton Yankewa | ±0.5mm |
| Ƙananan sharar gaba | 10mm |
| Tsawon tarin abubuwa a wurin ciyarwa (gami da fale-falen) | 1750mm |
| Tsawon tarin abubuwa mafi girma a lokacin isarwa (gami da fale-falen katako) | 1550mm |
| Girman ƙwallo | 1480 x 1104mm |
| Amfani da wutar lantarki (ba a haɗa da famfon iska ba) | 31.1kW // 380V, 3-PH, 50Hz |
| Girma (L x W x H) | 10 x 5.2 x 2.6m |
| Nauyin injin | Tan 27 |
Mai ciyar da takardar
Mai ciyarwa mai sauri da inganci mai kyau tare da kofuna huɗu masu tsotsa da kofuna shida na turawa, zanen gado suna raba buroshi da yatsu.
Ciyar da abinci mai kyau ga allon da aka yi da itace yayin ciyar da takardar guda ɗaya don zanen gado mai laushi.
An sanye shi da na'urar gano takardu biyu
Teburin ciyarwa
Tsarin Servo don sarrafa saurin ciyarwa.
Teburin ciyarwa tare da Ja da Tura Mai Canzawa Side Lay don daidaito.
Na'urar gano hotuna da kuma ƙafafun roba don ciyarwa mai sauri da kuma yin rijista daidai.
Za a canza tsarin dabarar roba da tagulla zuwa tsarin da ke ƙasa.
Sashen yanke mutu
An gina tsarin man shafawa na atomatik da mai zaman kansa don adana aikin gyara.
Tsarin layin tsakiya don saita na'urar yankewa da sauri da kuma canza ta.
Tsarin kulle ƙofar tsaro da na mutu don tabbatar da aiki lafiya.
Tsarin man shafawa na kai-tsaye ta atomatik da kuma mai zaman kansa don babban sarkar tuƙi.
An sanye shi da ƙafafun tsutsa, crankshaft yana aiki tare da manne mai kama da manne wanda ke yanke ƙananan dandamali.
Kariyar iyaka ta Torqure
Siemens allon taɓawa
Sashen yankewa
Tsarin layin tsakiya don saita na'urar yanke na'urar yanke na'urar cikin sauri da kuma canza aiki kuma ya dace da na'urorin yanke na'urar yanke na'urar yanke na'urar.
An sanye shi da taga mai aminci don aiki lafiya
Na'urori masu auna hotuna don gano sharar takarda da kuma kiyaye injin yana aiki cikin tsafta.
Tsarin cire kayan aiki uku
Na'urar raba shara ta gaba tana cirewa da kuma canja wurin gefen shara zuwa gefen injin ta hanyar bel ɗin jigilar kaya.
Sashen Isarwa
Tsarin isar da tarin manyan tari
Tagar aminci don aminci, sa ido kan ayyukan isar da kaya da kuma daidaita joggers na gefe
Motsa jiki na gaba, baya da gefe domin tabbatar da tsafta.
Tsarin busar da takardar iska da tsarin busar da takardar takarda don tattara takardu masu kyau.
Mai sauƙin daidaitawa na joggers na gefe da na baya don saurin daidaitawa.
Sashen Kula da Lantarki
Fasahar Siemens PLC.
Mai canza mitar YASKAWA
Duk kayan lantarki sun cika ƙa'idar CE.
Na'urorin haɗi na yau da kullun
1) Sassan sandunan gripper guda biyu
2) Saiti ɗaya na dandamalin aiki
3) Farantin ƙarfe mai yanka guda ɗaya (kayan aiki: 65Mn, kauri: 5mm)
4) Saiti ɗaya na kayan aiki don shigarwa da aiki da injin
5) Saiti ɗaya na kayan da ake amfani da su
6) Akwatunan tattara shara guda biyu
7) Saiti ɗaya na pre-loader
Gabatarwar Kamfani
Babban mai kera kuma mai samar da layin yanke kayan daki na flatbed da kuma masu kera fakitin allo na corrugated a kasar Sin.
Wurin masana'antu 47000 m2
An kammala shigarwa 3,500 a duk duniya
Ma'aikata 260 (Nuwamba, 2020)
